[libcamera-devel] [PATCH v3 5/6] libcamera: ipu3: Set pipe_mode based on stream configuration

[Jacopo Mondi]

Set the ImgU pipe_mode control based on the active stream configuration.
Use 'Video' pipe mode unless the viewfinder stream is not active.

Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
---
 src/libcamera/pipeline/ipu3/ipu3.cpp | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/src/libcamera/pipeline/ipu3/ipu3.cpp b/src/libcamera/pipeline/ipu3/ipu3.cpp
index 1c0a9825b4cd..d13bdfcce54e 100644
--- a/src/libcamera/pipeline/ipu3/ipu3.cpp
+++ b/src/libcamera/pipeline/ipu3/ipu3.cpp
@@ -22,6 +22,8 @@
 #include "media_device.h"
 #include "pipeline_handler.h"
 #include "utils.h"
+#include "v4l2_controls.h"
+#include "v4l2_device.h"
 #include "v4l2_subdevice.h"
 #include "v4l2_videodevice.h"
 
@@ -29,6 +31,8 @@ namespace libcamera {
 
 LOG_DEFINE_CATEGORY(IPU3)
 
+#define IPU3_PIPE_MODE_CTRL	0x009819c1
+
 class ImgUDevice
 {
 public:
@@ -536,6 +540,7 @@ int PipelineHandlerIPU3::configure(Camera *camera, CameraConfiguration *c)
 	 * the configuration of the active one for that purpose (there should
 	 * be at least one active stream in the configuration request).
 	 */
+	unsigned int pipeMode = 0;
 	if (!outStream->active_) {
 		ret = imgu->configureOutput(outStream->device_, config->at(0));
 		if (ret)
@@ -546,6 +551,12 @@ int PipelineHandlerIPU3::configure(Camera *camera, CameraConfiguration *c)
 		ret = imgu->configureOutput(vfStream->device_, config->at(0));
 		if (ret)
 			return ret;
+
+		/*
+		 * \todo: This works as long as only two concurrent streams
+		 * per pipe are supported.
+		 */
+		pipeMode = 1;
 	}
 
 	/*
@@ -559,6 +570,24 @@ int PipelineHandlerIPU3::configure(Camera *camera, CameraConfiguration *c)
 	if (ret)
 		return ret;
 
+	/* Apply the "pipe_mode" control to the ImgU subdevice. */
+	V4L2Controls ctrls;
+	ctrls.add(IPU3_PIPE_MODE_CTRL, pipeMode);
+	ret = imgu->imgu_->setControls(&ctrls);
+	if (ret) {
+		LOG(IPU3, Error) << "Unable to set pipe_mode control";
+		return ret;
+	}
+
+	ret = imgu->imgu_->getControls(&ctrls);
+	if (ret) {
+		LOG(IPU3, Error) << "Unable to get pipe_mode control value";
+		return ret;
+	}
+
+	pipeMode = ctrls.get(IPU3_PIPE_MODE_CTRL);
+	LOG(IPU3, Debug) << "ImgU pipe mode set to: "
+			 << (pipeMode ? "'Still Capture'" : "'Video'");
 	return 0;
 }
 
-- 
2.21.0