[libcamera-devel] [PATCH v2 0/4] test: camera: Add basic tests for the camera

[Niklas Söderlund]

Hi Laurent,

Thanks for your feedback on this series.

I have addressed all your comments and posted a v3 to the ML. I will let 
it float for a day or two in case there are more review comments and 
merge it if noting surface.

On 2019-03-11 03:22:28 +0100, Niklas Söderlund wrote:
> Hi,
> 
> This series add basic tests for the camera implementation. The tests 
> involve reading and setting configurations, access control of the state 
> machine and capturing.
> 
> All tests uses the vimc pipeline to allow the tests to run on as many
> platforms as possible. Down the line this might be expanded to run an
> all cameras detected by libcamera.
> 
> Niklas Söderlund (4):
>   test: camera: Add read default configuration test
>   test: camera: Add setting of configuration test
>   test: camera: Add capture test
>   test: camera: Add state machine test
> 
>  test/camera/camera_test.cpp           |  74 +++++++
>  test/camera/camera_test.h             |  35 ++++
>  test/camera/capture.cpp               | 136 +++++++++++++
>  test/camera/configuration_default.cpp |  68 +++++++
>  test/camera/configuration_set.cpp     |  90 +++++++++
>  test/camera/meson.build               |  15 ++
>  test/camera/statemachine.cpp          | 275 ++++++++++++++++++++++++++
>  test/meson.build                      |   1 +
>  8 files changed, 694 insertions(+)
>  create mode 100644 test/camera/camera_test.cpp
>  create mode 100644 test/camera/camera_test.h
>  create mode 100644 test/camera/capture.cpp
>  create mode 100644 test/camera/configuration_default.cpp
>  create mode 100644 test/camera/configuration_set.cpp
>  create mode 100644 test/camera/meson.build
>  create mode 100644 test/camera/statemachine.cpp
> 
> -- 
> 2.21.0
> 

-- 
Regards,
Niklas Söderlund