[libcamera-devel] [PATCH v5 3/3] android: camera_device: Reorder configurations before requesting

Kieran Bingham kieran.bingham at ideasonboard.com
Wed Dec 9 12:10:15 CET 2020


Hi Hiro,

On 09/12/2020 05:54, Hirokazu Honda wrote:
> This reorders Camera3Configs before executing
> CameraConfiguration::validate() to make it easier for the Camera
> to satisfy the Android framework request.
> 
> Signed-off-by: Hirokazu Honda <hiroh at chromium.org>
> Reviewed-by: Jacopo Mondi <jacopo at jmondi.org>
> ---
>  src/android/camera_device.cpp | 109 +++++++++++++++++++++++++++++++++-
>  1 file changed, 107 insertions(+), 2 deletions(-)
> 
> diff --git a/src/android/camera_device.cpp b/src/android/camera_device.cpp
> index b7bf3d88..c9e0ec98 100644
> --- a/src/android/camera_device.cpp
> +++ b/src/android/camera_device.cpp
> @@ -9,6 +9,7 @@
>  #include "camera_ops.h"
>  #include "post_processor.h"
> 
> +#include <optional>
>  #include <sys/mman.h>
>  #include <tuple>
>  #include <vector>
> @@ -27,6 +28,8 @@
> 
>  using namespace libcamera;
> 
> +LOG_DECLARE_CATEGORY(HAL)
> +
>  namespace {
> 
>  /*
> @@ -140,9 +143,109 @@ struct Camera3StreamConfig {
>  	std::vector<CameraStream::Type> types;
>  	StreamConfiguration config;
>  };
> -} /* namespace */
> 
> -LOG_DECLARE_CATEGORY(HAL)
> +/*
> + * Reorder the configurations so that libcamera::Camera can accept them as much
> + * as possible. The sort rule is as follows.
> + * 1.) The configuration for NV12 request whose resolution is the largest.
> + * 2.) The configuration for JPEG request.
> + * 3.) Others. Larger resolutions and different formats are put earlier.
> + */
> +std::vector<Camera3StreamConfig> sortCamera3StreamConfigs(
> +	std::vector<Camera3StreamConfig> unsortedConfigs,
> +	const camera3_stream_t *jpegStream)
> +{
> +	const size_t unsortedSize = unsortedConfigs.size();
> +	std::optional<Camera3StreamConfig> jpegConfig = std::nullopt;
> +
> +	if (jpegStream) {
> +		for (size_t i = 0; i < unsortedSize; ++i) {
> +			const auto &streams = unsortedConfigs[i].streams;
> +			if (std::find(streams.begin(), streams.end(),
> +				      jpegStream) != streams.end()) {
> +				jpegConfig = std::move(unsortedConfigs[i]);
> +				unsortedConfigs.erase(unsortedConfigs.begin() + i);
> +				break;
> +			}
> +		}
> +		if (!jpegConfig)
> +			LOG(HAL, Fatal) << "No Camera3StreamConfig is found for Jpeg";
> +	}
> +
> +	std::map<uint32_t, std::vector<Camera3StreamConfig>> formatToConfigs;
> +	for (const auto &streamConfig : unsortedConfigs) {
> +		const StreamConfiguration &config = streamConfig.config;
> +		formatToConfigs[config.pixelFormat].push_back(streamConfig);
> +
> +	}
> +	for (auto &[format, streamConfigs] : formatToConfigs) {
> +		/* Sorted by resolution. Smaller is put first. */
> +		std::sort(streamConfigs.begin(), streamConfigs.end(),
> +			  [](const auto &streamConfigA, const auto &streamConfigB) {
> +				const Size &sizeA = streamConfigA.config.size;
> +				const Size &sizeB = streamConfigB.config.size;
> +				return sizeA < sizeB;
> +			  });
> +	}
> +
> +	std::vector<Camera3StreamConfig> sortedConfigs;
> +	sortedConfigs.reserve(unsortedSize);
> +	/*
> +	 * NV12 is the most prioritized format. Put the configuration with NV12
> +	 * and the largest resolution first.
> +	 */
> +	const auto nv12It = formatToConfigs.find(formats::NV12);
> +	if (nv12It != formatToConfigs.end()) {
> +		auto &nv12Configs = nv12It->second;
> +		const Size &nv12LargestSize = nv12Configs.back().config.size;
> +		/*
> +		 * If JPEG will be created from NV12 and the size is larger than
> +		 * the largest NV12 configurations, then put the NV12
> +		 * configuration for JPEG first.
> +		 */
> +		if (jpegConfig && jpegConfig->config.pixelFormat == formats::NV12) {
> +			const Size &nv12SizeForJpeg = jpegConfig->config.size;
> +
> +			if (nv12LargestSize < nv12SizeForJpeg) {
> +				LOG(HAL, Debug) << "Insert " << jpegConfig->config.toString();
> +				sortedConfigs.push_back(std::move(*jpegConfig));
> +				jpegConfig = std::nullopt;
> +			}
> +		}
> +		LOG(HAL, Debug) << "Insert " << nv12Configs.back().config.toString();
> +		sortedConfigs.push_back(std::move(nv12Configs.back()));
> +		nv12Configs.pop_back();
> +	}
> +
> +	/* If the configuration for JPEG is there, then put it. */
> +	if (jpegConfig) {
> +		LOG(HAL, Debug) << "Insert " << jpegConfig->config.toString();
> +		sortedConfigs.push_back(std::move(*jpegConfig));
> +		jpegConfig = std::nullopt;
> +	}
> +
> +	/*
> +	 * Put configurations with different formats and larger resolutions
> +	 * earlier.
> +	 */
> +	while (!formatToConfigs.empty()) {
> +		for (auto it = formatToConfigs.begin(); it != formatToConfigs.end();) {
> +			auto& configs = it->second;
> +			if (configs.empty()) {
> +				it = formatToConfigs.erase(it);
> +				continue;
> +			}
> +			LOG(HAL, Debug) << "Insert " << configs.back().config.toString();
> +			sortedConfigs.push_back(std::move(configs.back()));
> +			configs.pop_back();
> +			it++;
> +		}
> +	}
> +	assert(sortedConfigs.size() == unsortedSize);

Should we assert(unsortedConfigs == 0) too?

But I don't think it's a blocker or required.

The sorting seems like a good idea otherwise.


> +
> +	return sortedConfigs;
> +}
> +} /* namespace */
> 
>  MappedCamera3Buffer::MappedCamera3Buffer(const buffer_handle_t camera3buffer,
>  					 int flags)
> @@ -1333,6 +1436,8 @@ int CameraDevice::configureStreams(camera3_stream_configuration_t *stream_list)
>  		streamConfigs[index].types.push_back(type);
>  	}
> 
> +	streamConfigs = sortCamera3StreamConfigs(std::move(streamConfigs),
> +						 jpegStream);

It's hard to see here, but I assume we now sort before we infer any
indexes, so the index remains valid.

As long as that statement is true,

Reviewed-by: Kieran Bingham <kieran.bingham at ideasonboard.com>



>  	for (const auto &streamConfig : streamConfigs) {
>  		config_->addConfiguration(streamConfig.config);
>  		for (size_t i = 0; i < streamConfig.streams.size(); ++i) {
> --
> 2.29.2.576.ga3fc446d84-goog
> _______________________________________________
> libcamera-devel mailing list
> libcamera-devel at lists.libcamera.org
> https://lists.libcamera.org/listinfo/libcamera-devel
> 

-- 
Regards
--
Kieran


More information about the libcamera-devel mailing list