[libcamera-devel] [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1

[Jacopo Mondi]

Hello,
  this series improves and expand the existing ov5647 sensor driver to
the same feature level as found in RaspberryPi BSP.

It is based on recent media tree master and the sensor bindings conversion
to dt-schema I sent out a few days ago:
"[PATCH 0/2] dt-bidings: media: ov5647 bindings + small fix"

The first patches in the series has been sent by Roman as part of
"[PATCH v2 0/6] ov5647 driver improvement"
I took his patches in, addressed review comments and rebased on top
of the new dt-schema bindings. I kept the extensive receiver list he had
in his series for this reason.

The series continues by polishing and cleaning up the driver and expanding
its functionalities to support multiple modes and image formats.

The series has been tested with libcamera and the driver functionalities
compared with the BSP driver ones, and tested stand-alone by capturing
raw frames with yavta.

Thanks
   j

Dave Stevenson (8):
  media: ov5647: Add support for PWDN GPIO.
  media: ov5647: Add support for non-continuous clock mode
  media: ov5647: Add set_fmt and get_fmt calls.
  media: ov5647: Add support for get_selection()
  media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag
  media: ov5647: Support V4L2_CID_PIXEL_RATE
  media: ov5647: Support V4L2_CID_VBLANK control
  media: ov5647: Advertise the correct exposure range

David Plowman (1):
  media: ov5647: Support gain, exposure and AWB controls

Jacopo Mondi (16):
  dt-bindings: media: ov5647: Document pwdn-gpios
  dt-bindings: media: ov5647: Document clock-noncontinuous
  media: ov5647: Fix format initialization
  media: ov5647: Fix style issues
  media: ov5647: Replace license with SPDX identifier
  media: ov5647: Fix return value from read/write
  media: ov5647: Program mode at s_stream(1) time
  media: ov5647: Implement enum_frame_size()
  media: ov5647: Protect s_stream() with mutex
  media: ov5647: Rationalize driver structure name
  media: ov5647: Break out format handling
  media: ov5647: Rename SBGGR8 VGA mode
  media: ov5647: Add SGGBR10_1X10 modes
  media: ov5647: Implement set_fmt pad operation
  media: ov5647: Program mode only if it has changed
  media: ov5647: Support V4L2_CID_HBLANK control

 .../devicetree/bindings/media/i2c/ov5647.yaml |   11 +
 drivers/media/i2c/ov5647.c                    | 1267 +++++++++++++++--
 2 files changed, 1126 insertions(+), 152 deletions(-)

--
2.27.0