[libcamera-devel] [PATCH 00/25] media: ov5647: Support RaspberryPi Camera Module v1

[Dafna Hirschfeld]

On 29.06.20 19:33, Dafna Hirschfeld wrote:
> Hi,
> Thanks for the series,
> 
> I tried to apply it on master and found out that the set
> is rebased on top of the patchset
> "dt-bidings: media: ov5647 bindings"
> so running 'git am' without the other set fails.
> Maybe better to merge the two sets or mention it in the cover letter.
> 
> Thanks,
> Dafna
> 
> 
> 
> On 23.06.20 12:07, Jacopo Mondi wrote:
>> -------------------------------------------------------------------------------
>> Second attempt after my ISP blocked the part of the first sending.
>> Also removed Luis Oliveira email from the receiver list as it gets
>> bounced back.
>> 550 5.1.1 <lolivei at synopsys.com>... User unknown
>> -------------------------------------------------------------------------------
>>
>> Hello,
>>    this series improves and expand the existing ov5647 sensor driver to
>> the same feature level as found in RaspberryPi BSP.
>>
>> It is based on recent media tree master and the sensor bindings conversion
>> to dt-schema I sent out a few days ago:
>> "[PATCH 0/2] dt-bidings: media: ov5647 bindings + small fix"

oops, maybe I should better read the cover letter first,
sorry for the noise,

Thanks,
Dafna

>>
>> The first patches in the series has been sent by Roman as part of
>> "[PATCH v2 0/6] ov5647 driver improvement"
>> I took his patches in, addressed review comments and rebased on top
>> of the new dt-schema bindings. I kept the extensive receiver list he had
>> in his series for this reason.
>>
>> The series continues by polishing and cleaning up the driver and expanding
>> its functionalities to support multiple modes and image formats.
>>
>> The series has been tested with libcamera and the driver functionalities
>> compared with the BSP driver ones, and tested stand-alone by capturing
>> raw frames with yavta.
>>
>> Thanks
>>     j
>>
>> Dave Stevenson (8):
>>    media: ov5647: Add support for PWDN GPIO.
>>    media: ov5647: Add support for non-continuous clock mode
>>    media: ov5647: Add set_fmt and get_fmt calls.
>>    media: ov5647: Add support for get_selection()
>>    media: ov5647: Set V4L2_SUBDEV_FL_HAS_EVENTS flag
>>    media: ov5647: Support V4L2_CID_PIXEL_RATE
>>    media: ov5647: Support V4L2_CID_VBLANK control
>>    media: ov5647: Advertise the correct exposure range
>>
>> David Plowman (1):
>>    media: ov5647: Support gain, exposure and AWB controls
>>
>> Jacopo Mondi (16):
>>    dt-bindings: media: ov5647: Document pwdn-gpios
>>    dt-bindings: media: ov5647: Document clock-noncontinuous
>>    media: ov5647: Fix format initialization
>>    media: ov5647: Fix style issues
>>    media: ov5647: Replace license with SPDX identifier
>>    media: ov5647: Fix return value from read/write
>>    media: ov5647: Program mode at s_stream(1) time
>>    media: ov5647: Implement enum_frame_size()
>>    media: ov5647: Protect s_stream() with mutex
>>    media: ov5647: Rationalize driver structure name
>>    media: ov5647: Break out format handling
>>    media: ov5647: Rename SBGGR8 VGA mode
>>    media: ov5647: Add SGGBR10_1X10 modes
>>    media: ov5647: Implement set_fmt pad operation
>>    media: ov5647: Program mode only if it has changed
>>    media: ov5647: Support V4L2_CID_HBLANK control
>>
>>   .../devicetree/bindings/media/i2c/ov5647.yaml |   11 +
>>   drivers/media/i2c/ov5647.c                    | 1267 +++++++++++++++--
>>   2 files changed, 1126 insertions(+), 152 deletions(-)
>>
>> -- 
>> 2.27.0
>>