[libcamera-devel] [PATCH 22/25] media: ov5647: Support V4L2_CID_PIXEL_RATE
Dave Stevenson
dave.stevenson at raspberrypi.com
Mon Jun 29 23:25:12 CEST 2020
Hi Dafna
On Mon, 29 Jun 2020 at 18:01, Dafna Hirschfeld
<dafna.hirschfeld at collabora.com> wrote:
>
>
>
> On 23.06.20 18:55, Jacopo Mondi wrote:
> > From: Dave Stevenson <dave.stevenson at raspberrypi.com>
> >
> > Clients need to know the pixel rate in order to compute exposure
> > and frame rate values. Advertise it.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> > Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
> > ---
> > drivers/media/i2c/ov5647.c | 40 +++++++++++++++++++++++++++++++-------
> > 1 file changed, 33 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
> > index 35865e56de5f9..218576a05e66b 100644
> > --- a/drivers/media/i2c/ov5647.c
> > +++ b/drivers/media/i2c/ov5647.c
> > @@ -76,6 +76,7 @@ struct regval_list {
> > struct ov5647_mode {
> > struct v4l2_mbus_framefmt format;
> > struct v4l2_rect crop;
> > + u64 pixel_rate;
> > struct regval_list *reg_list;
> > unsigned int num_regs;
> > };
> > @@ -97,6 +98,7 @@ struct ov5647 {
> > struct v4l2_ctrl_handler ctrls;
> > struct ov5647_mode *mode;
> > struct ov5647_mode *current_mode;
> > + struct v4l2_ctrl *pixel_rate;
> > };
> >
> > static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd)
> > @@ -583,6 +585,7 @@ static struct ov5647_mode ov5647_sbggr8_modes[] = {
> > .width = 1280,
> > .height = 960,
> > },
> > + .pixel_rate = 77291670,
> > .reg_list = ov5647_640x480_sbggr8,
> > .num_regs = ARRAY_SIZE(ov5647_640x480_sbggr8)
> > },
> > @@ -604,6 +607,7 @@ static struct ov5647_mode ov5647_sbggr10_modes[] = {
> > .width = 2592,
> > .height = 1944
> > },
> > + .pixel_rate = 87500000,
> > .reg_list = ov5647_2592x1944_sbggr10,
> > .num_regs = ARRAY_SIZE(ov5647_2592x1944_sbggr10)
> > },
> > @@ -622,6 +626,7 @@ static struct ov5647_mode ov5647_sbggr10_modes[] = {
> > .width = 1928,
> > .height = 1080,
> > },
> > + .pixel_rate = 81666700,
> > .reg_list = ov5647_1080p30_sbggr10,
> > .num_regs = ARRAY_SIZE(ov5647_1080p30_sbggr10)
> > },
> > @@ -640,6 +645,7 @@ static struct ov5647_mode ov5647_sbggr10_modes[] = {
> > .width = 2592,
> > .height = 1944,
> > },
> > + .pixel_rate = 81666700,
> > .reg_list = ov5647_2x2binned_sbggr10,
> > .num_regs = ARRAY_SIZE(ov5647_2x2binned_sbggr10)
> > },
> > @@ -658,6 +664,7 @@ static struct ov5647_mode ov5647_sbggr10_modes[] = {
> > .width = 2560,
> > .height = 1920,
> > },
> > + .pixel_rate = 55000000,
> > .reg_list = ov5647_640x480_sbggr10,
> > .num_regs = ARRAY_SIZE(ov5647_640x480_sbggr10)
> > },
> > @@ -1094,6 +1101,10 @@ static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
> > /* Update the sensor mode and apply at it at streamon time. */
> > mutex_lock(&sensor->lock);
> > sensor->mode = mode;
> > +
> > + __v4l2_ctrl_modify_range(sensor->pixel_rate, mode->pixel_rate,
> > + mode->pixel_rate, 1, mode->pixel_rate);
> > +
> > *fmt = mode->format;
> > mutex_unlock(&sensor->lock);
> >
> > @@ -1295,6 +1306,9 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
> > return ov5647_s_analogue_gain(sd, ctrl->val);
> > case V4L2_CID_EXPOSURE:
> > return ov5647_s_exposure(sd, ctrl->val);
> > + case V4L2_CID_PIXEL_RATE:
> > + /* Read-only, but we adjust it based on mode. */
>
> Looking at other drivers, I see they don't handle read only controls
> in s_ctrl cb. Also the docs (vidioc-queryctrl.rst) says that trying to set a read only control should
> return EINVAL
It was a while ago that I looked at this, but my memory says that
without a handler here then the call to __v4l2_ctrl_modify_range to
update the value failed. The ranges and default were changed, but the
current value wasn't.
Checking now, yes, without returning 0 here, __v4l2_ctrl_modify_range
returns -22 (-EINVAL) and v4l2-ctl --list-ctrls afterwards shows
Image Processing Controls
pixel_rate 0x009f0902 (int64) : min=87500000
max=87500000 step=1 default=87500000 value=81666700 flags=read-only
A failure of the framework then and needs fixing there, or is it
correct for the driver to have to implement a set hander if it needs
to update the ranges?
A quick grep implies that ov5647 is the first driver that needs to
update V4L2_CID_PIXEL_RATE based on mode. I'll check in the morning if
things like V4L2_CID_HBLANK behave the same - it may be a control type
issue with 64 bit values.
Interesting that the docs say EINVAL as at least one path in the
framework appears to return -EACCES [1]
Checking it:
pi at raspberrypi:~ $ v4l2-ctl --set-ctrl pixel_rate=42
VIDIOC_S_EXT_CTRLS: failed: Permission denied
Error setting controls: Permission denied
which would imply -EACCES
I am testing on a 5.4 kernel rather than media_tree.git, but there
don't appear to be any significant differences in this area between
the two.
Cheers.
Dave
[1] https://git.linuxtv.org/media_tree.git/tree/drivers/media/v4l2-core/v4l2-ctrls.c#n4224
> Thanks,
> Dafna
>
> > + return 0;
> > default:
> > dev_info(&client->dev,
> > "Control (id:0x%x, val:0x%x) not supported\n",
> > @@ -1313,7 +1327,7 @@ static int ov5647_init_controls(struct ov5647 *sensor)
> > {
> > struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
> >
> > - v4l2_ctrl_handler_init(&sensor->ctrls, 5);
> > + v4l2_ctrl_handler_init(&sensor->ctrls, 6);
> >
> > v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
> > V4L2_CID_AUTOGAIN, 0, 1, 1, 0);
> > @@ -1333,17 +1347,29 @@ static int ov5647_init_controls(struct ov5647 *sensor)
> > v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
> > V4L2_CID_ANALOGUE_GAIN, 16, 1023, 1, 32);
> >
> > - if (sensor->ctrls.error) {
> > - dev_err(&client->dev, "%s Controls initialization failed (%d)\n",
> > - __func__, sensor->ctrls.error);
> > - v4l2_ctrl_handler_free(&sensor->ctrls);
> > + /* By default, PIXEL_RATE is read only, but it does change per mode */
> > + sensor->pixel_rate = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
> > + V4L2_CID_PIXEL_RATE,
> > + sensor->mode->pixel_rate,
> > + sensor->mode->pixel_rate, 1,
> > + sensor->mode->pixel_rate);
> > + if (!sensor->pixel_rate)
> > + goto handler_free;
> > + sensor->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> >
> > - return sensor->ctrls.error;
> > - }
> > + if (sensor->ctrls.error)
> > + goto handler_free;
> >
> > sensor->sd.ctrl_handler = &sensor->ctrls;
> >
> > return 0;
> > +
> > +handler_free:
> > + dev_err(&client->dev, "%s Controls initialization failed (%d)\n",
> > + __func__, sensor->ctrls.error);
> > + v4l2_ctrl_handler_free(&sensor->ctrls);
> > +
> > + return sensor->ctrls.error;
> > }
> >
> > static int ov5647_parse_dt(struct ov5647 *sensor, struct device_node *np)
> >
> _______________________________________________
> libcamera-devel mailing list
> libcamera-devel at lists.libcamera.org
> https://lists.libcamera.org/listinfo/libcamera-devel
More information about the libcamera-devel
mailing list