[libcamera-devel] [PATCH 1/3] vimc: Add usage count to subdevices

[Niklas Söderlund]

Hi Helen,

Thanks for your notification.

On 2020-03-16 16:40:54 -0300, Helen Koike wrote:
> Hi Niklas,
> 
> On 5/17/19 10:07 PM, Niklas Söderlund wrote:
> > Prepare for multiple video streams from the same sensor by adding a use
> > counter to each subdevice. The counter is increase for every s_stream(1)
> > and decremented for every s_stream(0) call.
> > 
> > The subdevice stream is not started or stopped unless the usage count go
> > from 0 to 1 (started) or from 1 to 0 (stopped). This allow for multiple
> > s_stream() calls to try to either start or stop the device while only
> > the first/last call will actually effect the state of the device.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund at ragnatech.se>
> 
> This patch won't be required if the following series gets accepted
> https://patchwork.linuxtv.org/cover/62233/
> 
> Since helpers takes care that s_stream(true) won't be called twice without
> s_stream(false) (and the opposite is also true).

Sweet, it will be nice to get multiple stream support upstream for VIMC!

> 
> Regards,
> Helen
> 
> > ---
> >  drivers/media/platform/vimc/vimc-debayer.c | 8 ++++++++
> >  drivers/media/platform/vimc/vimc-scaler.c  | 8 ++++++++
> >  drivers/media/platform/vimc/vimc-sensor.c  | 7 +++++++
> >  3 files changed, 23 insertions(+)
> > 
> > diff --git a/drivers/media/platform/vimc/vimc-debayer.c b/drivers/media/platform/vimc/vimc-debayer.c
> > index 281f9c1a7249ad1d..624fc23ce3077d40 100644
> > --- a/drivers/media/platform/vimc/vimc-debayer.c
> > +++ b/drivers/media/platform/vimc/vimc-debayer.c
> > @@ -56,6 +56,7 @@ struct vimc_deb_device {
> >  	struct vimc_ent_device ved;
> >  	struct v4l2_subdev sd;
> >  	struct device *dev;
> > +	atomic_t use_count;
> >  	/* The active format */
> >  	struct v4l2_mbus_framefmt sink_fmt;
> >  	u32 src_code;
> > @@ -337,6 +338,9 @@ static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
> >  		const struct v4l2_format_info *pix_info;
> >  		unsigned int frame_size;
> >  
> > +		if (atomic_inc_return(&vdeb->use_count) != 1)
> > +			return 0;
> > +
> >  		if (vdeb->src_frame)
> >  			return 0;
> >  
> > @@ -374,6 +378,9 @@ static int vimc_deb_s_stream(struct v4l2_subdev *sd, int enable)
> >  			return -ENOMEM;
> >  
> >  	} else {
> > +		if (atomic_dec_return(&vdeb->use_count) != 0)
> > +			return 0;
> > +
> >  		if (!vdeb->src_frame)
> >  			return 0;
> >  
> > @@ -562,6 +569,7 @@ static int vimc_deb_comp_bind(struct device *comp, struct device *master,
> >  	vdeb->ved.process_frame = vimc_deb_process_frame;
> >  	dev_set_drvdata(comp, &vdeb->ved);
> >  	vdeb->dev = comp;
> > +	atomic_set(&vdeb->use_count, 0);
> >  
> >  	/* Initialize the frame format */
> >  	vdeb->sink_fmt = sink_fmt_default;
> > diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c
> > index 8aecf8e920310608..37d2020d987a7d80 100644
> > --- a/drivers/media/platform/vimc/vimc-scaler.c
> > +++ b/drivers/media/platform/vimc/vimc-scaler.c
> > @@ -45,6 +45,7 @@ struct vimc_sca_device {
> >  	struct vimc_ent_device ved;
> >  	struct v4l2_subdev sd;
> >  	struct device *dev;
> > +	atomic_t use_count;
> >  	/* NOTE: the source fmt is the same as the sink
> >  	 * with the width and hight multiplied by mult
> >  	 */
> > @@ -213,6 +214,9 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
> >  		const struct v4l2_format_info *pix_info;
> >  		unsigned int frame_size;
> >  
> > +		if (atomic_inc_return(&vsca->use_count) != 1)
> > +			return 0;
> > +
> >  		if (vsca->src_frame)
> >  			return 0;
> >  
> > @@ -242,6 +246,9 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable)
> >  			return -ENOMEM;
> >  
> >  	} else {
> > +		if (atomic_dec_return(&vsca->use_count) != 0)
> > +			return 0;
> > +
> >  		if (!vsca->src_frame)
> >  			return 0;
> >  
> > @@ -396,6 +403,7 @@ static int vimc_sca_comp_bind(struct device *comp, struct device *master,
> >  	vsca->ved.process_frame = vimc_sca_process_frame;
> >  	dev_set_drvdata(comp, &vsca->ved);
> >  	vsca->dev = comp;
> > +	atomic_set(&vsca->use_count, 0);
> >  
> >  	/* Initialize the frame format */
> >  	vsca->sink_fmt = sink_fmt_default;
> > diff --git a/drivers/media/platform/vimc/vimc-sensor.c b/drivers/media/platform/vimc/vimc-sensor.c
> > index baca9ca67ce0af0b..36c3cea85a185f4b 100644
> > --- a/drivers/media/platform/vimc/vimc-sensor.c
> > +++ b/drivers/media/platform/vimc/vimc-sensor.c
> > @@ -34,6 +34,7 @@ struct vimc_sen_device {
> >  	struct vimc_ent_device ved;
> >  	struct v4l2_subdev sd;
> >  	struct device *dev;
> > +	atomic_t use_count;
> >  	struct tpg_data tpg;
> >  	struct task_struct *kthread_sen;
> >  	u8 *frame;
> > @@ -197,6 +198,9 @@ static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
> >  		const struct v4l2_format_info *pix_info;
> >  		unsigned int frame_size;
> >  
> > +		if (atomic_inc_return(&vsen->use_count) != 1)
> > +			return 0;
> > +
> >  		if (vsen->kthread_sen)
> >  			/* tpg is already executing */
> >  			return 0;
> > @@ -218,6 +222,8 @@ static int vimc_sen_s_stream(struct v4l2_subdev *sd, int enable)
> >  		vimc_sen_tpg_s_format(vsen);
> >  
> >  	} else {
> > +		if (atomic_dec_return(&vsen->use_count) != 0)
> > +			return 0;
> >  
> >  		vfree(vsen->frame);
> >  		vsen->frame = NULL;
> > @@ -367,6 +373,7 @@ static int vimc_sen_comp_bind(struct device *comp, struct device *master,
> >  	vsen->ved.process_frame = vimc_sen_process_frame;
> >  	dev_set_drvdata(comp, &vsen->ved);
> >  	vsen->dev = comp;
> > +	atomic_set(&vsen->use_count, 0);
> >  
> >  	/* Initialize the frame format */
> >  	vsen->mbus_format = fmt_default;
> > 

-- 
Regards,
Niklas Söderlund