[libcamera-devel] [PATCH v2 4/6] libcamera: controls: Add AWB related controls
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Mar 26 16:46:45 CET 2020
Hi Naush,
Thank you for the patch.
On Fri, Mar 20, 2020 at 03:11:42PM +0000, Kieran Bingham wrote:
> On 09/03/2020 12:33, Naushir Patuck wrote:
> > AwbMode is a new enum type to specify operating mode of the AWB
> > algorithm. All modes may not be supported by all platforms.
> >
> > ManualWbGains is a new float arary type used to specify manual red
>
> /arary/array/
>
> > and blue (in that order) colour channel gains when AWB is disabled.
> >
> > Signed-off-by: Naushir Patuck <naush at raspberrypi.com>
> > ---
> > src/libcamera/control_ids.yaml | 47 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> >
> > diff --git a/src/libcamera/control_ids.yaml b/src/libcamera/control_ids.yaml
> > index da1a7b43..9a33094a 100644
> > --- a/src/libcamera/control_ids.yaml
> > +++ b/src/libcamera/control_ids.yaml
> > @@ -143,6 +143,53 @@ controls:
> > description: |
> > Enable or disable the AWB.
> >
> > + - AwbMode:
> > + type: int32_t
> > + description: |
> > + Specify the range of illumants to use for the AWB algorihtm. The modes
>
> /illumants/illuminance/
> or
> /illumants/luminance/ ?
> I'm not quite sure what word you were going for with illumants.
>
> s/algorihtm/algorithm/
>
> > + supported are platform specific, and not all modes may be supported.
> > + enum:
> > + - name: AwbAuto
> > + value: 0
> > + description: Search over the whole CT range.
> > + - name: AwbIncandescent
> > + value: 1
> > + description: Incandescent AWB lamp mode.
> > + - name: AwbTungsten
> > + value: 2
> > + description: Tungsten AWB lamp mode.
> > + - name: AwbFluorescent
> > + value: 3
> > + description: Fluorescent AWB lamp mode.
> > + - name: AwbIndoor
> > + value: 4
> > + description: Indoor AWB lighting mode.
> > + - name: AwbDaylight
> > + value: 5
> > + description: Daylight AWB lighting mode.
> > + - name: AwbCloudy
> > + value: 6
> > + description: Cloudy AWB lighting mode.
>
> I wonder what sort order we should apply to control values like this?
> I'm sure Laurent would love anything to be alphabetically sorted by a
> default if nothing else applies, but would there be an expected order to
> this list otherwise?
I like auto being first, and it fortunately starts with an A ;-) Jokes
aside, this is a pretty standard configuration parameter for cameras,
would there be any published standard that we could follow for possible
values ?
> > + - name: AwbCustom1
> > + value: 7
> > + description: Custom AWB mode 1.
> > + - name: AwbCustom2
> > + value: 8
> > + description: Custom AWB mode 2.
> > + - name: AwbCustom3
> > + value: 9
> > + description: Custom AWB mode 3.
> > + - name: AwbModeMax
> > + value: 9
> > + description: Maximum allowed value (place any new values above here).
>
> Only the same response as the others here,
>
> > +
> > + - ManualWbGains:
> > + type: float
> > + description: |
> > + Specify a fixed gain parameter for the Red and Blue colour channels,
> > + in that order.
> > + size: [2]
How do these controls interact with ManualGain ? I wonder if we
shouldn't merge them all in a 2x2 matrix of red, 2 x green and blue
gains.
> > +
> > - Brightness:
> > type: int32_t
> > description: Specify a fixed brightness parameter
--
Regards,
Laurent Pinchart
More information about the libcamera-devel
mailing list