[libcamera-devel] [PATCH v5 03/14] libcamera: control_ids: Define draft controls
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sun Oct 25 23:51:40 CET 2020
Hi Jacopo,
Thank you for the patch.
On Sun, Oct 25, 2020 at 05:04:23PM +0100, Jacopo Mondi wrote:
> libcamera is in the process of defining its own set of controls
> to enable applications to control the image capture process and
> return information on the captured frames.
>
> To temporarily close the gap in the Android camera HAL and support all
> controls required in the LIMITED hardware level, define a set of Draft
> controls whose values are taken from their Android definition, in order
> to allow pipeline handlers to support Android.
>
> Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Reviewed-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo at jmondi.org>
> ---
> src/libcamera/control_ids.yaml | 257 +++++++++++++++++++++++++++++++++
> 1 file changed, 257 insertions(+)
>
> diff --git a/src/libcamera/control_ids.yaml b/src/libcamera/control_ids.yaml
> index 4c415545dcae..2fca88e36635 100644
> --- a/src/libcamera/control_ids.yaml
> +++ b/src/libcamera/control_ids.yaml
> @@ -284,4 +284,261 @@ controls:
> order in an array of 9 floating point values.
>
> size: [3x3]
> +
> + - AePrecaptureTrigger:
> + type: int32_t
> + draft: true
> + description: |
> + Control for AE metering trigger. Currently identical to
> + ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER.
> +
> + Whether the camera device will trigger a precapture metering sequence
> + when it processes this request.
> + enum:
> + - name: AePrecaptureTriggerIdle
> + value: 0
> + description: The trigger is idle.
> + - name: AePrecaptureTriggerStart
> + value: 1
> + description: The pre-capture AE metering is started by the camera.
> + - name: AePrecaptureTriggerCancel
> + value: 2
> + description: |
> + The camera will cancel any active or completed metering sequence.
> + The AE algorithm is reset to its initial state.
> +
> + - AfTrigger:
> + type: int32_t
> + draft: true
> + description: |
> + Control for AF trigger. Currently identical to
> + ANDROID_CONTROL_AF_TRIGGER.
> +
> + Whether the camera device will trigger autofocus for this request.
> + enum:
> + - name: AfTriggerIdle
> + value: 0
> + description: The trigger is idle.
> + - name: AfTriggerStart
> + value: 1
> + description: The AF routine is started by the camera.
> + - name: AfTriggerCancel
> + value: 2
> + description: |
> + The camera will cancel any active trigger and the AF routine is
> + reset to its initial state.
> +
> + - NoiseReductionMode:
> + type: int32_t
> + draft: true
> + description: |
> + Control to select the noise reduction algorithm mode. Currently
> + identical to ANDROID_NOISE_REDUCTION_MODE.
> +
> + Mode of operation for the noise reduction algorithm.
> + enum:
> + - name: NoiseReductionModeOff
> + value: 0
> + description: No noise reduction is applied
> + - name: NoiseReductionModeFast
> + value: 1
> + description: |
> + Noise reduction is applied without reducing the frame rate.
> + - name: NoiseReductionModeHighQuality
> + value: 2
> + description: |
> + High quality noise reduction at the expense of frame rate.
> + - name: NoiseReductionModeMinimal
> + value: 3
> + description: |
> + Minimal noise reduction is applied without reducing the frame rate.
> + - name: NoiseReductionModeZSL
> + value: 4
> + description: |
> + Noise reduction is applied at different levels to different streams.
> +
> + - ColorCorrectionAberrationMode:
> + type: int32_t
> + draft: true
> + description: |
> + Control to select the color correction aberration mode. Currently
> + identical to ANDROID_COLOR_CORRECTION_ABERRATION_MODE.
> +
> + Mode of operation for the chromatic aberration correction algorithm.
> + enum:
> + - name: ColorCorrectionAberrationOff
> + value: 0
> + description: No aberration correction is applied.
> + - name: ColorCorrectionAberrationFast
> + value: 1
> + description: Aberration correction will not slow down the frame rate.
> + - name: ColorCorrectionAberrationHighQuality
> + value: 2
> + description: |
> + High quality aberration correction which might reduce the frame
> + rate.
> +
> + - AeState:
> + type: int32_t
> + draft: true
> + description: |
> + Control to report the current AE algorithm state. Currently identical to
> + ANDROID_CONTROL_AE_STATE.
> +
> + Current state of the AE algorithm.
> + enum:
> + - name: AeStateInactive
> + value: 0
> + description: The AE algorithm is inactive.
> + - name: AeStateSearching
> + value: 1
> + description: The AE algorithm has not converged yet.
> + - name: AeStateConverged
> + value: 2
> + description: The AE algorithm has converged.
> + - name: AeStateLocked
> + value: 3
> + description: The AE algorithm is locked.
> + - name: AeStateFlashRequired
> + value: 4
> + description: The AE algorithm would need a flash for good results
> + - name: AeStatePrecapture
> + value: 5
> + description: |
> + The AE algorithm has started a pre-capture metering session.
> + \sa AePrecaptureTrigger
> +
> + - AfState:
> + type: int32_t
> + draft: true
> + description: |
> + Control to report the current AF algorithm state. Currently identical to
> + ANDROID_CONTROL_AF_STATE.
> +
> + Current state of the AF algorithm.
> + enum:
> + - name: AfStateInactive
> + value: 0
> + description: The AF algorithm is inactive.
> + - name: AfStatePassiveScan
> + value: 1
> + description: |
> + AF is performing a passive scan of the scene in continuous
> + auto-focus mode.
> + - name: AfStatePassiveFocused
> + value: 2
> + description: |
> + AF believes the scene is in focus, but might restart scanning.
> + - name: AfStateActiveScan
> + value: 3
> + description: |
> + AF is performing a scan triggered by an AF trigger request.
> + \sa AfTrigger
> + - name: AfStateFocusedLock
> + value: 4
> + description: |
> + AF believes has focused correctly and has locked focus.
> + - name: AfStateNotFocusedLock
> + value: 5
> + description: |
> + AF has not been able to focus and has locked.
> + - name: AfStatePassiveUnfocused
> + value: 6
> + description: |
> + AF has completed a passive scan without finding focus.
> +
> + - AwbState:
> + type: int32_t
> + draft: true
> + description: |
> + Control to report the current AWB algorithm state. Currently identical
> + to ANDROID_CONTROL_AWB_STATE.
> +
> + Current state of the AWB algorithm.
> + enum:
> + - name: AwbStateInactive
> + value: 0
> + description: The AWB algorithm is inactive.
> + - name: AwbStateSearching
> + value: 1
> + description: The AWB algorithm has not converged yet.
> + - name: AwbConverged
> + value: 2
> + description: The AWB algorithm has converged.
> + - name: AwbLocked
> + value: 3
> + description: The AWB algorithm is locked.
> +
> + - ScalerCropRegion:
> + type: Rectangle
> + draft: true
> + description: |
> + Control to report the region of the sensor that has been read-out.
> + Currently identical to ANDROID_SCALER_CROP_REGION.
> +
> + The area of the sensor that has been read out, defined relatively to
> + the active pixel array size.
> +
> + \sa properties::PixelArrayActiveAreas
Just a quick note to mention that the zoom series is almost ready to be
merged. Should we drop this control for the meantime ?
> +
> + - SensorTimestamp:
> + type: int64_t
> + draft: true
> + description: |
> + Control to report the start of exposure of the first row of the captured
> + image. Currently identical to ANDROID_SENSOR_TIMESTAMP.
> +
> + - SensorRollingShutterSkew:
> + type: int64_t
> + draft: true
> + description: |
> + Control to report the time between the start of exposure of the first
> + row and the start of exposure of the last row. Currently identical to
> + ANDROID_SENSOR_ROLLING_SHUTTER_SKEW
> +
> + - LensShadingMapMode:
> + type: int32_t
> + draft: true
> + description: |
> + Control to report if the lens shading map is available. Currently
> + identical to ANDROID_STATISTICS_LENS_SHADING_MAP_MODE.
> + enum:
> + - name: LensShadingMapModeOff
> + value: 0
> + description: No lens shading map mode is available.
> + - name: LensShadingMapModeOn
> + value: 1
> + description: The lens shading map mode is available.
> +
> + - SceneFlicker:
> + type: int32_t
> + draft: true
> + description: |
> + Control to report the detected scene light frequency. Currently
> + identical to ANDROID_STATISTICS_SCENE_FLICKER.
> + enum:
> + - name: SceneFickerOff
> + value: 0
> + description: No flickering detected.
> + - name: SceneFicker50Hz
> + value: 1
> + description: 50Hz flickering detected.
> + - name: SceneFicker60Hz
> + value: 2
> + description: 60Hz flickering detected.
> +
> + - PipelineDepth:
> + type: int32_t
> + draft: true
> + description: |
> + Specifies the number of pipeline stages the frame went through from when
> + it was exposed to when the final completed result was available to the
> + framework. Always less than or equal to PipelineMaxDepth. Currently
> + identical to ANDROID_REQUEST_PIPELINE_DEPTH.
> +
> + The typical value for this control is 3 as a frame is first exposed,
> + captured and then processed in a single pass through the ISP. Any
> + additional processing step performed after the ISP pass (in example face
> + detection, additional format conversions etc) count as an additional
> + pipeline stage.
> ...
--
Regards,
Laurent Pinchart
More information about the libcamera-devel
mailing list