[libcamera-devel] [RFC PATCH 1/1] libcamera: controls: Controls for driving AF (autofocus) algorithms
Hanlin Chen
hanlinchen at chromium.org
Thu Dec 16 12:18:39 CET 2021
Hi David, thanks for this work!
On Mon, Dec 13, 2021 at 11:22 PM David Plowman
<david.plowman at raspberrypi.com> wrote:
>
> This patch describes a series of controls that allow applications to
> drive AF algorithms:
>
> AfMode - auto or continuous
> AfRange - full, macro or normal
> AfSpeed - fast or slow
> AfMethod - single or multi-spot
> AfWindow - AF window locations
> AfTrigger - start (trigger an AF scan) or cancel
> LensPosition - position of lens from lens driver
> AfState - reset, scanning, focused or failed
> ---
> src/libcamera/control_ids.yaml | 227 ++++++++++++++++++++++++---------
> 1 file changed, 167 insertions(+), 60 deletions(-)
>
> diff --git a/src/libcamera/control_ids.yaml b/src/libcamera/control_ids.yaml
> index 9d4638ae..e579f7b7 100644
> --- a/src/libcamera/control_ids.yaml
> +++ b/src/libcamera/control_ids.yaml
> @@ -406,27 +406,6 @@ controls:
> The camera will cancel any active or completed metering sequence.
> The AE algorithm is reset to its initial state.
>
> - - AfTrigger:
> - type: int32_t
> - draft: true
> - description: |
> - Control for AF trigger. Currently identical to
> - ANDROID_CONTROL_AF_TRIGGER.
> -
> - Whether the camera device will trigger autofocus for this request.
> - enum:
> - - name: AfTriggerIdle
> - value: 0
> - description: The trigger is idle.
> - - name: AfTriggerStart
> - value: 1
> - description: The AF routine is started by the camera.
> - - name: AfTriggerCancel
> - value: 2
> - description: |
> - The camera will cancel any active trigger and the AF routine is
> - reset to its initial state.
> -
> - NoiseReductionMode:
> type: int32_t
> draft: true
> @@ -507,45 +486,6 @@ controls:
> The AE algorithm has started a pre-capture metering session.
> \sa AePrecaptureTrigger
>
> - - AfState:
> - type: int32_t
> - draft: true
> - description: |
> - Control to report the current AF algorithm state. Currently identical to
> - ANDROID_CONTROL_AF_STATE.
> -
> - Current state of the AF algorithm.
> - enum:
> - - name: AfStateInactive
> - value: 0
> - description: The AF algorithm is inactive.
> - - name: AfStatePassiveScan
> - value: 1
> - description: |
> - AF is performing a passive scan of the scene in continuous
> - auto-focus mode.
> - - name: AfStatePassiveFocused
> - value: 2
> - description: |
> - AF believes the scene is in focus, but might restart scanning.
> - - name: AfStateActiveScan
> - value: 3
> - description: |
> - AF is performing a scan triggered by an AF trigger request.
> - \sa AfTrigger
> - - name: AfStateFocusedLock
> - value: 4
> - description: |
> - AF believes has focused correctly and has locked focus.
> - - name: AfStateNotFocusedLock
> - value: 5
> - description: |
> - AF has not been able to focus and has locked.
> - - name: AfStatePassiveUnfocused
> - value: 6
> - description: |
> - AF has completed a passive scan without finding focus.
> -
> - AwbState:
> type: int32_t
> draft: true
> @@ -690,4 +630,171 @@ controls:
> value. All of the custom test patterns will be static (that is the
> raw image must not vary from frame to frame).
>
> + - AfMode:
> + type: int32_t
> + draft: true
> + description: |
> + Control to set the mode of the AF (autofocus) algorithm.
> + enum:
> + - name: AfModeAuto
> + value: 0
> + description: |
> + The AF algorithm is in auto mode. This means that the algorithm
> + will never move the lens or change state unless the AfTrigger
> + control is used. The AfTrigger control can be used to initiate a
> + focus scan, the results of which will be reported by the AfState.
> +
> + In this mode, an application can move the lens for itself using
> + the LensPosition control. If the algorithm was scanning when the
> + lens is moved in this way, then the scan is implicitly cancelled.
I would suggest splitting the Auto mode into AfModeOnDemand and
AfModeManual (The naming could be re-considered).
The reason is that the sub-controls for each AfModes could be distinct.
1. AfModeManual:
LensPosition is valid only for the mode, and AfState is always AfStateReset.
2. AfModeOnDemand
AfTrigger and AfRange are valid only for the mode, and AfState reports
accordingly. The scan is implicitly canceled when changing from the
mode.
3. AfModeContinuous
AfSpeed and "pause" are valid only for the mode, and AfState reports
accordingly. The scan is implicitly canceled when changing from the
mode.
> + - name: AfModeContinuous
> + value: 1
> + description: |
> + The AF algorithm is in continuous mode. This means that the lens
> + can re-start a scan spontaneously at any moment, without any user
> + intervention. The AfState still reports whether the algorithm is
> + currently scanning or not, though the application has no ability
> + to initiate or cancel scans, nor move the lens for itself.
> +
> + The mode can be set to AfModeAuto which has the effect of
> + "pausing" any continuous AF activity, after which it could then
> + be moved back to AfModeContinuous to resume operation.
> +
> + - AfRange:
> + type: int32_t
> + draft: true
> + description: |
> + Control to set the range of focus distances that is scanned.
> + enum:
> + - name: AfRangeFull
> + value: 0
> + description: The full range of focus distances is scanned.
> + - name: AfRangeMacro
> + value: 1
> + description: Only close distances are scanned.
> + - name: AfRangeNormal
> + value: 2
> + description: |
> + The full range of focus distances is scanned except for some of
> + the closest macro positions.
> +
> + - AfSpeed:
> + type: int32_t
> + draft: true
> + description: |
> + Control that determines whether the AF algorithm is to move the lens
> + as quickly as possible or more steadily. For example, during video
> + recording it may be desirable not to move the lens too abruptly, but
> + when in a preview mode (waiting for a still capture) it may be
> + helpful to move the lens as quickly as is reasonably possible.
> + enum:
> + - name: AfSpeedFast
> + value: 0
> + description: Move the lens quickly.
> + - name: AfSpeedSlow
> + value: 0
> + description: Move the lens more steadily.
How about
s/Fast/Aggressively
s/Slow/Steadily
> +
> + - AfMethod:
> + type: int32_t
> + draft: true
> + description: |
> + Control whether the AF algorithm uses a single window in the image to
> + determine the best focus position, or multiple windows simultaneously.
> + enum:
> + - name: AfMethodSingle
> + value: 0
> + description: |
> + A single window within the image, defaulting to the centre, is used
> + to select the best focus distance.
> + - name: AfMethodMultiSpot
> + value: 0
> + description: |
> + Multiple windows within the image are used to select the best focus
> + distance. The best focus distance is found for each one of the
> + windows, and then the distance that is closest to the camera is
> + selected.
> +
> + - AfWindow:
> + type: Rectangle
> + draft: true
> + description: |
> + Sets the focus windows used by the AF algorithm. The units used express
> + a proportion of the ScalerCrop control (or if unavailable, of the entire
> + image), as u0.16 format numbers.
> +
> + In order to be activated, a rectangle must be programmed with non-zero
> + width and height. If no rectangles are programmed in this way, then the
> + system will choose its own single default window in the centre of the
> + image.
> +
> + If AfMethod is set to AfMethodSingle, then only the first Rectangle in
> + this list is used (or the system default one if it is unprogrammed).
> +
> + If AfMethod is set to AfMethodMultiSpot then all the valid Rectangles in
> + this list are used. The size of the control indicates how many such
> + windows can be programmed and will vary between different platforms.
> +
> + size: [platform dependent]
> +
> + - AfTrigger:
> + type: int32_t
> + draft: true
> + description: |
> + This control starts an autofocus scan when AfMode is set to AfModeAuto,
> + and can also be used to terminate a scan early.
> +
> + It is ignored if AfMode is set to AfModeContinuous.
> +
> + enum:
> + - name: AfTriggerStart
> + value: 0
> + description: Start an AF scan. Ignored if a scan is in progress.
> + - name: AfTriggerCancel
> + value: 1
> + description: Cancel an AF scan. Ingored if no scan is in progress.
> +
> + - LensPosition:
> + type: int32_t
> + draft: true
> + description: |
> + Acts as a control to instruct the lens to move to a particular position
> + and also reports back the position of the lens for each frame.
> +
> + The units are determined by the lens driver.
> +
> + If the LensPosition control is used while an AF scan is in progress,
> + the scan is implicitly cancelled and the lens is then moved to the
> + desired location. It is ignored if AfMode is set to AfModeContinuous.
> +
> + - AfState:
> + type: int32_t
> + draft: true
> + description: |
> + Reports the current state of the AF algorithm.
> + enum:
> + - name: AfStateReset
> + value: 0
> + description: |
> + The AF algorithm reports this state when:
> + * The camera system has just been started.
> + * A scan has been cancelled.
> + * The lens has been moved by the LensPosition control.
> + - name: AfStateScanning
> + value: 1
> + description: |
> + AF is performing a scan. This state can be entered spontaneously
> + if AfMode is set to AfModeContinuous, otherwise it requires the
> + application to use the AfTrigger control to start the scan.
> + - name: AfStateFocused
> + value: 2
> + description: |
> + An AF scan has been performed and the algorithm believes the
> + scene is in focus.
> + - name: AfStateFailed
> + value: 3
> + description: |
> + An AF scan has been performed but the algorithm has not been able
> + to find the best focus position.
> +
> ...
> --
> 2.30.2
>
More information about the libcamera-devel
mailing list