[libcamera-devel] [PATCH v2 07/11] libcamera: ipu3: Attach to an IPA and allow it to set sensor controls

[Umang Jain]

Hi Niklas,

On 12/29/20 9:33 PM, Niklas Söderlund wrote:
> Attach to the IPA and allow it to push V4L2 controls that applies on the
> camera sensor. The IPA is not fully integrated in the pipeline as
> statistics and parameters buffers are not yet allocated, processed by
> the IPA nor queued to the hardware.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund at ragnatech.se>
> ---
> * Changes since v1
> - Rewrite to not use CameraSensor.
> - Fix mistake where configuration sen to IPA was overwritten.
> - Check that IPA configuration was successful before starting.
> - Update commit message.
> ---
>   src/libcamera/pipeline/ipu3/ipu3.cpp | 103 +++++++++++++++++++++++++++
>   1 file changed, 103 insertions(+)
>
> diff --git a/src/libcamera/pipeline/ipu3/ipu3.cpp b/src/libcamera/pipeline/ipu3/ipu3.cpp
> index a87ce8f3378ba2fe..95f1b75dc8be5d40 100644
> --- a/src/libcamera/pipeline/ipu3/ipu3.cpp
> +++ b/src/libcamera/pipeline/ipu3/ipu3.cpp
> @@ -14,11 +14,14 @@
>   #include <libcamera/camera.h>
>   #include <libcamera/control_ids.h>
>   #include <libcamera/formats.h>
> +#include <libcamera/ipa/ipu3.h>
>   #include <libcamera/request.h>
>   #include <libcamera/stream.h>
>   
>   #include "libcamera/internal/camera_sensor.h"
> +#include "libcamera/internal/delayed_controls.h"
>   #include "libcamera/internal/device_enumerator.h"
> +#include "libcamera/internal/ipa_manager.h"
>   #include "libcamera/internal/log.h"
>   #include "libcamera/internal/media_device.h"
>   #include "libcamera/internal/pipeline_handler.h"
> @@ -53,6 +56,8 @@ public:
>   	{
>   	}
>   
> +	int loadIPA();
> +
>   	void imguOutputBufferReady(FrameBuffer *buffer);
>   	void cio2BufferReady(FrameBuffer *buffer);
>   
> @@ -62,6 +67,11 @@ public:
>   	Stream outStream_;
>   	Stream vfStream_;
>   	Stream rawStream_;
> +
> +	std::unique_ptr<DelayedControls> delayedCtrls_;
> +
> +private:
> +	void actOnIpa(unsigned int id, const IPAOperationData &op);
>   };
>   
>   class IPU3CameraConfiguration : public CameraConfiguration
> @@ -590,6 +600,13 @@ int PipelineHandlerIPU3::start(Camera *camera, [[maybe_unused]] ControlList *con
>   	IPU3CameraData *data = cameraData(camera);
>   	CIO2Device *cio2 = &data->cio2_;
>   	ImgUDevice *imgu = data->imgu_;
> +
> +	CameraSensorInfo sensorInfo = {};
> +	std::map<unsigned int, IPAStream> streamConfig;
> +	std::map<unsigned int, const ControlInfoMap &> entityControls;
> +	IPAOperationData ipaConfig;
> +	IPAOperationData result = {};
> +
>   	int ret;
>   
>   	/* Allocate buffers for internal pipeline usage. */
> @@ -597,6 +614,11 @@ int PipelineHandlerIPU3::start(Camera *camera, [[maybe_unused]] ControlList *con
>   	if (ret)
>   		return ret;
>   
> +	IPAOperationData ipaData = {};
> +	ret = data->ipa_->start(ipaData, nullptr);
> +	if (ret)
> +		goto error;
> +
>   	/*
>   	 * Start the ImgU video devices, buffers will be queued to the
>   	 * ImgU output and viewfinder when requests will be queued.
> @@ -612,9 +634,40 @@ int PipelineHandlerIPU3::start(Camera *camera, [[maybe_unused]] ControlList *con
>   		goto error;
>   	}
>   
> +	/* Inform IPA of stream configuration and sensor controls. */
> +	ret = data->cio2_.sensor()->sensorInfo(&sensorInfo);
> +	if (ret) {
> +		/* \todo Turn to hard failure once sensors info is mandatory. */
> +		LOG(IPU3, Warning) << "Camera sensor information not available";
> +		sensorInfo = {};
> +		ret = 0;
> +	}
> +
> +	streamConfig[0] = {
> +		.pixelFormat = data->outStream_.configuration().pixelFormat,
> +		.size = data->outStream_.configuration().size,
> +	};
> +	streamConfig[1] = {
> +		.pixelFormat = data->vfStream_.configuration().pixelFormat,
> +		.size = data->vfStream_.configuration().size,
> +	};
> +
> +	entityControls.emplace(0, data->cio2_.sensor()->controls());
> +
> +	data->ipa_->configure(sensorInfo, streamConfig, entityControls,
> +			      ipaConfig, &result);
> +
> +	if ((result.operation != IPU3_IPA_STATUS_CONFIGURATION) ||
> +	    (result.data.size() != 1) || (result.data.at(0) != 1)) {
> +		LOG(IPU3, Warning) << "Failed to configure IPA";
> +		ret = -EINVAL;
> +		goto error;
> +	}
> +
>   	return 0;
>   
>   error:
> +	data->ipa_->stop();
>   	freeBuffers(camera);
>   	LOG(IPU3, Error) << "Failed to start camera " << camera->id();
>   
> @@ -631,6 +684,8 @@ void PipelineHandlerIPU3::stop(Camera *camera)
>   	if (ret)
>   		LOG(IPU3, Warning) << "Failed to stop camera " << camera->id();
>   
> +	data->ipa_->stop();
> +
>   	freeBuffers(camera);
>   }
>   
> @@ -762,12 +817,32 @@ int PipelineHandlerIPU3::registerCameras()
>   		if (ret)
>   			continue;
>   
> +		ret = data->loadIPA();
> +		if (ret)
> +			continue;
> +
>   		/* Initialize the camera properties. */
>   		data->properties_ = cio2->sensor()->properties();
>   
>   		/* Initialze the camera controls. */
>   		data->controlInfo_ = IPU3Controls;
>   
> +		/*
> +		 * \todo Read dealy values from the sensor itself or from a
s/dealy/delay/
> +		 * a sensor database. For now use generic values taken from
> +		 * the Raspberry Pi and listed as generic values.
may be you meant : s/generic values/'generic values'  ?
> +		 */
> +		std::unordered_map<uint32_t, unsigned int> delays = {
> +			{ V4L2_CID_ANALOGUE_GAIN, 1 },
> +			{ V4L2_CID_EXPOSURE, 2 },
> +		};
> +
> +		data->delayedCtrls_ =
> +			std::make_unique<DelayedControls>(cio2->sensor()->device(),
> +							  delays);
> +		data->cio2_.frameStart().connect(data->delayedCtrls_.get(),
> +						 &DelayedControls::applyControls);
> +
>   		/**
>   		 * \todo Dynamically assign ImgU and output devices to each
>   		 * stream and camera; as of now, limit support to two cameras
> @@ -811,6 +886,34 @@ int PipelineHandlerIPU3::registerCameras()
>   	return numCameras ? 0 : -ENODEV;
>   }
>   
> +int IPU3CameraData::loadIPA()
> +{
> +	ipa_ = IPAManager::createIPA(pipe_, 1, 1);
> +	if (!ipa_)
> +		return -ENOENT;
> +
> +	ipa_->queueFrameAction.connect(this, &IPU3CameraData::actOnIpa);
> +
> +	ipa_->init(IPASettings{});
> +
> +	return 0;
> +}
> +
> +void IPU3CameraData::actOnIpa([[maybe_unused]] unsigned int id,
> +			      const IPAOperationData &action)
> +{
> +	switch (action.operation) {
> +	case IPU3_IPA_ACTION_SET_SENSOR_CONTROLS: {
> +		const ControlList &controls = action.controls[0];
> +		delayedCtrls_->push(controls);
> +		break;
> +	}
> +	default:
> +		LOG(IPU3, Error) << "Unknown action " << action.operation;
> +		break;
> +	}
> +}
> +
>   /* -----------------------------------------------------------------------------
>    * Buffer Ready slots
>    */