[libcamera-devel] [PATCH 1/2] media: imx258: Rectify mismatch of VTS value

[Umang Jain]

From: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

The frame_length_lines (0x0340) registers are hard-coded as follows:

- 4208x3118
  frame_length_lines = 0x0c50

- 2104x1560
  frame_length_lines = 0x0638

- 1048x780
  frame_length_lines = 0x034c

The driver exposes the V4L2_CID_VBLANK control in read-only mode and
sets its value to vts_def - height, where vts_def is a mode-dependent
value coming from the supported_modes array. It is set using one of
the following macros defined in the driver:

  #define IMX258_VTS_30FPS                0x0c98
  #define IMX258_VTS_30FPS_2K             0x0638
  #define IMX258_VTS_30FPS_VGA            0x034c

There's a clear mismatch in the value for the full resolution mode i.e.
IMX258_VTS_30FPS. Fix it by rectifying the macro with the value set for
the frame_length_lines register as stated above.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
---
 drivers/media/i2c/imx258.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index 7ab9e5f9f267..4e695096e5d0 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -23,7 +23,7 @@
 #define IMX258_CHIP_ID			0x0258
 
 /* V_TIMING internal */
-#define IMX258_VTS_30FPS		0x0c98
+#define IMX258_VTS_30FPS		0x0c50
 #define IMX258_VTS_30FPS_2K		0x0638
 #define IMX258_VTS_30FPS_VGA		0x034c
 #define IMX258_VTS_MAX			0xffff
-- 
2.31.1