[libcamera-devel] [PATCH v5 2/4] ipa: raspberrypi: Switch ipa and cam_helper to use utils::Duration
Naushir Patuck
naush at raspberrypi.com
Tue Jun 8 11:47:47 CEST 2021
Hi Laurent,
Thank you for your review feedback.
On Tue, 8 Jun 2021 at 02:17, Laurent Pinchart <
laurent.pinchart at ideasonboard.com> wrote:
> Hi Naush,
>
> Thank you for the patch.
>
> On Tue, May 25, 2021 at 12:42:39PM +0100, Naushir Patuck wrote:
> > Switch the ipa and cam_helper code to use libcamera::utils::Duration for
> > all time based variables. This improves code readability and avoids
> > possible errors when converting between time bases.
> >
> > Signed-off-by: Naushir Patuck <naush at raspberrypi.com>
> > Reviewed-by: David Plowman <david.plowman at raspberrypi.com>
> > ---
> > src/ipa/raspberrypi/cam_helper.cpp | 20 +++---
> > src/ipa/raspberrypi/cam_helper.hpp | 10 +--
> > src/ipa/raspberrypi/controller/camera_mode.h | 6 +-
> > src/ipa/raspberrypi/raspberrypi.cpp | 64 +++++++++++---------
> > 4 files changed, 55 insertions(+), 45 deletions(-)
> >
> > diff --git a/src/ipa/raspberrypi/cam_helper.cpp
> b/src/ipa/raspberrypi/cam_helper.cpp
> > index 09917f3cc079..7b4331a87a42 100644
> > --- a/src/ipa/raspberrypi/cam_helper.cpp
> > +++ b/src/ipa/raspberrypi/cam_helper.cpp
> > @@ -18,6 +18,7 @@
> >
> > using namespace RPiController;
> > using namespace libcamera;
> > +using libcamera::utils::Duration;
>
> I would have used utils::Duration below, but I don't mind.
>
> >
> > namespace libcamera {
> > LOG_DECLARE_CATEGORY(IPARPI)
> > @@ -61,20 +62,21 @@ void CamHelper::Process([[maybe_unused]]
> StatisticsPtr &stats,
> > {
> > }
> >
> > -uint32_t CamHelper::ExposureLines(double exposure_us) const
> > +uint32_t CamHelper::ExposureLines(const Duration &exposure) const
>
> Given that the duration only stores a double value, you could pass it by
> value instead of by reference. The comment applies to the whole series.
> That would be my preference, but it's up to you.
>
Agreed, I will change all functions to pass by value in the next revision.
>
> Overall the code is really much nicer !
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
Thanks. Yes, this change does make time based variables so much easier
to work with! At some point, we should change libcamera controls to use
this :-)
Regards,
Naush
> > {
> > assert(initialized_);
> > - return exposure_us * 1000.0 / mode_.line_length;
> > + return exposure / mode_.line_length;
> > }
> >
> > -double CamHelper::Exposure(uint32_t exposure_lines) const
> > +Duration CamHelper::Exposure(uint32_t exposure_lines) const
> > {
> > assert(initialized_);
> > - return exposure_lines * mode_.line_length / 1000.0;
> > + return exposure_lines * mode_.line_length;
> > }
> >
> > -uint32_t CamHelper::GetVBlanking(double &exposure, double
> minFrameDuration,
> > - double maxFrameDuration) const
> > +uint32_t CamHelper::GetVBlanking(Duration &exposure,
> > + const Duration &minFrameDuration,
> > + const Duration &maxFrameDuration) const
> > {
> > uint32_t frameLengthMin, frameLengthMax, vblank;
> > uint32_t exposureLines = ExposureLines(exposure);
> > @@ -85,8 +87,8 @@ uint32_t CamHelper::GetVBlanking(double &exposure,
> double minFrameDuration,
> > * minFrameDuration and maxFrameDuration are clamped by the caller
> > * based on the limits for the active sensor mode.
> > */
> > - frameLengthMin = 1e3 * minFrameDuration / mode_.line_length;
> > - frameLengthMax = 1e3 * maxFrameDuration / mode_.line_length;
> > + frameLengthMin = minFrameDuration / mode_.line_length;
> > + frameLengthMax = maxFrameDuration / mode_.line_length;
> >
> > /*
> > * Limit the exposure to the maximum frame duration requested, and
> > @@ -182,7 +184,7 @@ void CamHelper::parseEmbeddedData(Span<const
> uint8_t> buffer,
> > return;
> > }
> >
> > - deviceStatus.shutter_speed = Exposure(exposureLines);
> > + deviceStatus.shutter_speed =
> Exposure(exposureLines).get<std::micro>();
> > deviceStatus.analogue_gain = Gain(gainCode);
> >
> > LOG(IPARPI, Debug) << "Metadata updated - Exposure : "
> > diff --git a/src/ipa/raspberrypi/cam_helper.hpp
> b/src/ipa/raspberrypi/cam_helper.hpp
> > index a52f3f0b583c..07481e4174a7 100644
> > --- a/src/ipa/raspberrypi/cam_helper.hpp
> > +++ b/src/ipa/raspberrypi/cam_helper.hpp
> > @@ -15,6 +15,7 @@
> > #include "controller/metadata.hpp"
> > #include "md_parser.hpp"
> >
> > +#include "libcamera/internal/utils.h"
> > #include "libcamera/internal/v4l2_videodevice.h"
> >
> > namespace RPiController {
> > @@ -72,10 +73,11 @@ public:
> > virtual void Prepare(libcamera::Span<const uint8_t> buffer,
> > Metadata &metadata);
> > virtual void Process(StatisticsPtr &stats, Metadata &metadata);
> > - uint32_t ExposureLines(double exposure_us) const;
> > - double Exposure(uint32_t exposure_lines) const; // in us
> > - virtual uint32_t GetVBlanking(double &exposure_us, double
> minFrameDuration,
> > - double maxFrameDuration) const;
> > + uint32_t ExposureLines(const libcamera::utils::Duration &exposure)
> const;
> > + libcamera::utils::Duration Exposure(uint32_t exposure_lines) const;
> > + virtual uint32_t GetVBlanking(libcamera::utils::Duration &exposure,
> > + const libcamera::utils::Duration
> &minFrameDuration,
> > + const libcamera::utils::Duration
> &maxFrameDuration) const;
> > virtual uint32_t GainCode(double gain) const = 0;
> > virtual double Gain(uint32_t gain_code) const = 0;
> > virtual void GetDelays(int &exposure_delay, int &gain_delay,
> > diff --git a/src/ipa/raspberrypi/controller/camera_mode.h
> b/src/ipa/raspberrypi/controller/camera_mode.h
> > index 256438c931d9..2aa2335dcf90 100644
> > --- a/src/ipa/raspberrypi/controller/camera_mode.h
> > +++ b/src/ipa/raspberrypi/controller/camera_mode.h
> > @@ -8,6 +8,8 @@
> >
> > #include <libcamera/transform.h>
> >
> > +#include "libcamera/internal/utils.h"
> > +
> > // Description of a "camera mode", holding enough information for
> control
> > // algorithms to adapt their behaviour to the different modes of the
> camera,
> > // including binning, scaling, cropping etc.
> > @@ -33,8 +35,8 @@ struct CameraMode {
> > double scale_x, scale_y;
> > // scaling of the noise compared to the native sensor mode
> > double noise_factor;
> > - // line time in nanoseconds
> > - double line_length;
> > + // line time
> > + libcamera::utils::Duration line_length;
> > // any camera transform *not* reflected already in the camera
> tuning
> > libcamera::Transform transform;
> > // minimum and maximum fame lengths in units of lines
> > diff --git a/src/ipa/raspberrypi/raspberrypi.cpp
> b/src/ipa/raspberrypi/raspberrypi.cpp
> > index 52d91db282ea..4e02e94084f7 100644
> > --- a/src/ipa/raspberrypi/raspberrypi.cpp
> > +++ b/src/ipa/raspberrypi/raspberrypi.cpp
> > @@ -55,19 +55,22 @@
> >
> > namespace libcamera {
> >
> > +using namespace std::literals::chrono_literals;
> > +using utils::Duration;
> > +
> > /* Configure the sensor with these values initially. */
> > constexpr double DefaultAnalogueGain = 1.0;
> > -constexpr unsigned int DefaultExposureTime = 20000;
> > -constexpr double defaultMinFrameDuration = 1e6 / 30.0;
> > -constexpr double defaultMaxFrameDuration = 1e6 / 0.01;
> > +constexpr Duration DefaultExposureTime = 20.0ms;
> > +constexpr Duration defaultMinFrameDuration = 1.0s / 30.0;
> > +constexpr Duration defaultMaxFrameDuration = 100.0s;
> >
> > /*
> > - * Determine the minimum allowable inter-frame duration (in us) to run
> the
> > - * controller algorithms. If the pipeline handler provider frames at a
> rate
> > - * higher than this, we rate-limit the controller Prepare() and
> Process() calls
> > - * to lower than or equal to this rate.
> > + * Determine the minimum allowable inter-frame duration to run the
> controller
> > + * algorithms. If the pipeline handler provider frames at a rate higher
> than this,
> > + * we rate-limit the controller Prepare() and Process() calls to lower
> than or
> > + * equal to this rate.
> > */
> > -constexpr double controllerMinFrameDuration = 1e6 / 60.0;
> > +constexpr Duration controllerMinFrameDuration = 1.0s / 60.0;
> >
> > LOG_DEFINE_CATEGORY(IPARPI)
> >
> > @@ -111,7 +114,8 @@ private:
> > void reportMetadata();
> > void fillDeviceStatus(const ControlList &sensorControls);
> > void processStats(unsigned int bufferId);
> > - void applyFrameDurations(double minFrameDuration, double
> maxFrameDuration);
> > + void applyFrameDurations(const Duration &minFrameDuration,
> > + const Duration &maxFrameDuration);
> > void applyAGC(const struct AgcStatus *agcStatus, ControlList
> &ctrls);
> > void applyAWB(const struct AwbStatus *awbStatus, ControlList
> &ctrls);
> > void applyDG(const struct AgcStatus *dgStatus, ControlList &ctrls);
> > @@ -167,9 +171,9 @@ private:
> > /* Distinguish the first camera start from others. */
> > bool firstStart_;
> >
> > - /* Frame duration (1/fps) limits, given in microseconds. */
> > - double minFrameDuration_;
> > - double maxFrameDuration_;
> > + /* Frame duration (1/fps) limits. */
> > + Duration minFrameDuration_;
> > + Duration maxFrameDuration_;
> > };
> >
> > int IPARPi::init(const IPASettings &settings, ipa::RPi::SensorConfig
> *sensorConfig)
> > @@ -311,10 +315,10 @@ void IPARPi::setMode(const CameraSensorInfo
> &sensorInfo)
> > mode_.noise_factor = sqrt(mode_.bin_x * mode_.bin_y);
> >
> > /*
> > - * Calculate the line length in nanoseconds as the ratio between
> > - * the line length in pixels and the pixel rate.
> > + * Calculate the line length as the ratio between the line length
> in
> > + * pixels and the pixel rate.
> > */
> > - mode_.line_length = 1e9 * sensorInfo.lineLength /
> sensorInfo.pixelRate;
> > + mode_.line_length = sensorInfo.lineLength * (1.0s /
> sensorInfo.pixelRate);
> >
> > /*
> > * Set the frame length limits for the mode to ensure exposure and
> > @@ -387,7 +391,7 @@ int IPARPi::configure(const CameraSensorInfo
> &sensorInfo,
> > /* Supply initial values for gain and exposure. */
> > ControlList ctrls(sensorCtrls_);
> > AgcStatus agcStatus;
> > - agcStatus.shutter_time = DefaultExposureTime;
> > + agcStatus.shutter_time =
> DefaultExposureTime.get<std::micro>();
> > agcStatus.analogue_gain = DefaultAnalogueGain;
> > applyAGC(&agcStatus, ctrls);
> >
> > @@ -862,7 +866,7 @@ void IPARPi::queueRequest(const ControlList
> &controls)
> >
> > case controls::FRAME_DURATIONS: {
> > auto frameDurations = ctrl.second.get<Span<const
> int64_t>>();
> > - applyFrameDurations(frameDurations[0],
> frameDurations[1]);
> > + applyFrameDurations(frameDurations[0] * 1.0us,
> frameDurations[1] * 1.0us);
> > break;
> > }
> >
> > @@ -937,9 +941,9 @@ void IPARPi::prepareISP(const ipa::RPi::ISPConfig
> &data)
> > returnEmbeddedBuffer(data.embeddedBufferId);
> >
> > /* Allow a 10% margin on the comparison below. */
> > - constexpr double eps = controllerMinFrameDuration * 1e3 * 0.1;
> > + Duration delta = (frameTimestamp - lastRunTimestamp_) * 1.0ns;
> > if (lastRunTimestamp_ && frameCount_ > dropFrameCount_ &&
> > - frameTimestamp - lastRunTimestamp_ + eps <
> controllerMinFrameDuration * 1e3) {
> > + delta < controllerMinFrameDuration * 0.9) {
> > /*
> > * Ensure we merge the previous frame's metadata with the
> current
> > * frame. This will not overwrite exposure/gain values for
> the
> > @@ -1012,7 +1016,7 @@ void IPARPi::fillDeviceStatus(const ControlList
> &sensorControls)
> > int32_t exposureLines =
> sensorControls.get(V4L2_CID_EXPOSURE).get<int32_t>();
> > int32_t gainCode =
> sensorControls.get(V4L2_CID_ANALOGUE_GAIN).get<int32_t>();
> >
> > - deviceStatus.shutter_speed = helper_->Exposure(exposureLines);
> > + deviceStatus.shutter_speed =
> helper_->Exposure(exposureLines).get<std::micro>();
> > deviceStatus.analogue_gain = helper_->Gain(gainCode);
> >
> > LOG(IPARPI, Debug) << "Metadata - Exposure : "
> > @@ -1057,10 +1061,11 @@ void IPARPi::applyAWB(const struct AwbStatus
> *awbStatus, ControlList &ctrls)
> > static_cast<int32_t>(awbStatus->gain_b * 1000));
> > }
> >
> > -void IPARPi::applyFrameDurations(double minFrameDuration, double
> maxFrameDuration)
> > +void IPARPi::applyFrameDurations(const Duration &minFrameDuration,
> > + const Duration &maxFrameDuration)
> > {
> > - const double minSensorFrameDuration = 1e-3 *
> mode_.min_frame_length * mode_.line_length;
> > - const double maxSensorFrameDuration = 1e-3 *
> mode_.max_frame_length * mode_.line_length;
> > + const Duration minSensorFrameDuration = mode_.min_frame_length *
> mode_.line_length;
> > + const Duration maxSensorFrameDuration = mode_.max_frame_length *
> mode_.line_length;
> >
> > /*
> > * This will only be applied once AGC recalculations occur.
> > @@ -1076,20 +1081,20 @@ void IPARPi::applyFrameDurations(double
> minFrameDuration, double maxFrameDuratio
> >
> > /* Return the validated limits via metadata. */
> > libcameraMetadata_.set(controls::FrameDurations,
> > - { static_cast<int64_t>(minFrameDuration_),
> > - static_cast<int64_t>(maxFrameDuration_)
> });
> > + {
> static_cast<int64_t>(minFrameDuration_.get<std::micro>()),
> > +
> static_cast<int64_t>(maxFrameDuration_.get<std::micro>()) });
> >
> > /*
> > * Calculate the maximum exposure time possible for the AGC to use.
> > * GetVBlanking() will update maxShutter with the largest exposure
> > * value possible.
> > */
> > - double maxShutter = std::numeric_limits<double>::max();
> > + Duration maxShutter = Duration::max();
> > helper_->GetVBlanking(maxShutter, minFrameDuration_,
> maxFrameDuration_);
> >
> > RPiController::AgcAlgorithm *agc =
> dynamic_cast<RPiController::AgcAlgorithm *>(
> > controller_.GetAlgorithm("agc"));
> > - agc->SetMaxShutter(maxShutter);
> > + agc->SetMaxShutter(maxShutter.get<std::micro>());
> > }
> >
> > void IPARPi::applyAGC(const struct AgcStatus *agcStatus, ControlList
> &ctrls)
> > @@ -1097,9 +1102,8 @@ void IPARPi::applyAGC(const struct AgcStatus
> *agcStatus, ControlList &ctrls)
> > int32_t gainCode = helper_->GainCode(agcStatus->analogue_gain);
> >
> > /* GetVBlanking might clip exposure time to the fps limits. */
> > - double exposure = agcStatus->shutter_time;
> > - int32_t vblanking = helper_->GetVBlanking(exposure,
> minFrameDuration_,
> > - maxFrameDuration_);
> > + Duration exposure = agcStatus->shutter_time * 1.0us;
> > + int32_t vblanking = helper_->GetVBlanking(exposure,
> minFrameDuration_, maxFrameDuration_);
> > int32_t exposureLines = helper_->ExposureLines(exposure);
> >
> > LOG(IPARPI, Debug) << "Applying AGC Exposure: " << exposure
>
> --
> Regards,
>
> Laurent Pinchart
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.libcamera.org/pipermail/libcamera-devel/attachments/20210608/ae9a632f/attachment-0001.htm>
More information about the libcamera-devel
mailing list