[libcamera-devel] [RFC PATCH 04/12] ipa: ipu3: Move the Frame Context queue to libipa
Jacopo Mondi
jacopo at jmondi.org
Mon Jul 25 17:20:51 CEST 2022
Hi Kieran
On Thu, Jul 21, 2022 at 01:13:02PM +0100, Kieran Bingham via libcamera-devel wrote:
> From: Umang Jain <umang.jain at ideasonboard.com>
>
> Provide a direct FCQueue abstraction to facilitate creating a queue of
> Frame Context structures.
>
> The IPAFrameContext is moved back to the ipu3/ipa_context.h and a queue
> added to the IPU3, but the Algorithms are not yet moved from the single
> FrameContext exposed by the IPA context to use the correct one from the
> queue until the Algorithm interfaces are fully updated.
>
> Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
> Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> ---
> src/ipa/ipu3/ipa_context.cpp | 17 -------
> src/ipa/ipu3/ipa_context.h | 15 ++----
> src/ipa/ipu3/ipu3.cpp | 13 +++--
> src/ipa/libipa/fc_queue.cpp | 96 ++++++++++++++++++++++++++++++++++++
> src/ipa/libipa/fc_queue.h | 93 ++++++++++++++++++++++++++++++++++
> src/ipa/libipa/meson.build | 2 +
> 6 files changed, 204 insertions(+), 32 deletions(-)
> create mode 100644 src/ipa/libipa/fc_queue.cpp
> create mode 100644 src/ipa/libipa/fc_queue.h
>
> diff --git a/src/ipa/ipu3/ipa_context.cpp b/src/ipa/ipu3/ipa_context.cpp
> index 13cdb835ef7f..dd139cb4c868 100644
> --- a/src/ipa/ipu3/ipa_context.cpp
> +++ b/src/ipa/ipu3/ipa_context.cpp
> @@ -180,27 +180,10 @@ namespace libcamera::ipa::ipu3 {
> * <linux/intel-ipu3.h> struct ipu3_uapi_gamma_corr_lut for further details.
> */
>
> -/**
> - * \brief Default constructor for IPAFrameContext
> - */
> -IPAFrameContext::IPAFrameContext() = default;
> -
> -/**
> - * \brief Construct a IPAFrameContext instance
> - */
> -IPAFrameContext::IPAFrameContext(uint32_t id, const ControlList &reqControls)
> - : frame(id), frameControls(reqControls)
> -{
> - sensor = {};
> -}
> -
> /**
> * \var IPAFrameContext::frame
> * \brief The frame number
> *
> - * \var IPAFrameContext::frameControls
> - * \brief Controls sent in by the application while queuing the request
> - *
> * \var IPAFrameContext::sensor
> * \brief Effective sensor values that were applied for the frame
> *
> diff --git a/src/ipa/ipu3/ipa_context.h b/src/ipa/ipu3/ipa_context.h
> index 42e11141d3a1..193fc44a821a 100644
> --- a/src/ipa/ipu3/ipa_context.h
> +++ b/src/ipa/ipu3/ipa_context.h
> @@ -8,8 +8,6 @@
>
> #pragma once
>
> -#include <array>
> -
> #include <linux/intel-ipu3.h>
>
> #include <libcamera/base/utils.h>
> @@ -17,13 +15,12 @@
> #include <libcamera/controls.h>
> #include <libcamera/geometry.h>
>
> +#include <libipa/fc_queue.h>
> +
> namespace libcamera {
>
> namespace ipa::ipu3 {
>
> -/* Maximum number of frame contexts to be held */
> -static constexpr uint32_t kMaxFrameContexts = 16;
The size of the FCQueue should probably come from the IPA
implementation, as different platforms will have a different queue
depth to handle.
It can be made a second template argument.
> -
> struct IPASessionConfiguration {
> struct {
> ipu3_uapi_grid_config bdsGrid;
> @@ -77,23 +74,19 @@ struct IPAActiveState {
> };
>
> struct IPAFrameContext {
> - IPAFrameContext();
> - IPAFrameContext(uint32_t id, const ControlList &reqControls);
> + uint32_t frame;
>
> struct {
> uint32_t exposure;
> double gain;
> } sensor;
> -
> - uint32_t frame;
> - ControlList frameControls;
> };
>
> struct IPAContext {
> IPASessionConfiguration configuration;
> IPAActiveState activeState;
>
> - std::array<IPAFrameContext, kMaxFrameContexts> frameContexts;
> + FCQueue<IPAFrameContext> frameContexts;
> };
>
> } /* namespace ipa::ipu3 */
> diff --git a/src/ipa/ipu3/ipu3.cpp b/src/ipa/ipu3/ipu3.cpp
> index 2f6bb672f7bb..55e82cd404f4 100644
> --- a/src/ipa/ipu3/ipu3.cpp
> +++ b/src/ipa/ipu3/ipu3.cpp
> @@ -38,6 +38,8 @@
> #include "algorithms/tone_mapping.h"
> #include "libipa/camera_sensor_helper.h"
>
> +#include "ipa_context.h"
> +
> /* Minimum grid width, expressed as a number of cells */
> static constexpr uint32_t kMinGridWidth = 16;
> /* Maximum grid width, expressed as a number of cells */
> @@ -456,8 +458,7 @@ int IPAIPU3::configure(const IPAConfigInfo &configInfo,
>
> /* Clean IPAActiveState at each reconfiguration. */
> context_.activeState = {};
> - IPAFrameContext initFrameContext;
> - context_.frameContexts.fill(initFrameContext);
> + context_.frameContexts.clear();
>
> if (!validateSensorControls()) {
> LOG(IPAIPU3, Error) << "Sensor control validation failed.";
> @@ -569,7 +570,7 @@ void IPAIPU3::processStatsBuffer(const uint32_t frame,
> const ipu3_uapi_stats_3a *stats =
> reinterpret_cast<ipu3_uapi_stats_3a *>(mem.data());
>
> - IPAFrameContext &frameContext = context_.frameContexts[frame % kMaxFrameContexts];
> + IPAFrameContext &frameContext = context_.frameContexts.get(frame);
>
> if (frameContext.frame != frame)
> LOG(IPAIPU3, Warning) << "Frame " << frame << " does not match its frame context";
> @@ -618,7 +619,11 @@ void IPAIPU3::processStatsBuffer(const uint32_t frame,
> void IPAIPU3::queueRequest(const uint32_t frame, const ControlList &controls)
> {
> /* \todo Start processing for 'frame' based on 'controls'. */
> - context_.frameContexts[frame % kMaxFrameContexts] = { frame, controls };
> + IPAFrameContext &frameContext = context_.frameContexts.initialise(frame);
> +
> + /* \todo Implement queueRequest to each algorithm. */
> + (void)frameContext;
> + (void)controls;
I'm sure this will be expanded later but it could be simplified as
void IPAIPU3::queueRequest(const uint32_t frame, [[maybe_unused]] const ControlList &controls)
{
/* \todo Start processing for 'frame' based on 'controls'. */
context_.frameContexts.initialise(frame);
}
> }
>
> /**
> diff --git a/src/ipa/libipa/fc_queue.cpp b/src/ipa/libipa/fc_queue.cpp
> new file mode 100644
> index 000000000000..ecb47f287350
> --- /dev/null
> +++ b/src/ipa/libipa/fc_queue.cpp
> @@ -0,0 +1,96 @@
> +/* SPDX-License-Identifier: LGPL-2.1-or-later */
> +/*
> + * Copyright (C) 2022, Google Inc.
> + *
> + * fc_queue.cpp - IPA Frame context queue
> + */
> +
> +#include "fc_queue.h"
> +
> +#include <libcamera/base/log.h>
> +
> +namespace libcamera {
> +
> +LOG_DEFINE_CATEGORY(FCQueue)
Is this needed here or can be moved to the .h ?
> +
> +namespace ipa {
> +
> +/**
> + * \file fc_queue.h
> + * \brief Queue to access per-frame Context
> + */
> +
> +/**
> + * \class FCQueue
> + * \brief A support class for queueing Frame Context instances through the IPA
frame context or FrameContext, here and in the other parts of the
documentation ?
> + * \tparam FrameContext The IPA specific Frame Context type for this queue
> + *
> + * The Frame Context Queue provides a simple circular buffer implementation to
> + * store IPA specific context for each frame through its lifetime within the
> + * IPA.
> + *
> + * FrameContexts are expected to be referenced by a monotonically increasing
> + * sequence count referring to a Frame sequence.
"Frame sequence number" ?
> + *
> + * A FrameContext is initialised for a given frame when the corresponding
> + * Request is first queued into the IPA. From that point on the FrameContext can
> + * be obtained by the IPA and its algorithms by referencing it from the frame
> + * sequence number.
> + *
> + * A frame sequence number from the image source must correspond to the request
> + * sequence number for this implementation to be supported in an IPA. It is
> + * expected that the same sequence number will be used to reference the context
> + * of the Frame from the point of queueing the request, specifying controls for
> + * a given frame, and processing of any ISP related controls and statistics for
> + * the same corresponding image.
> + *
> + * IPA specific FrameContexts should inherit from the IPAFrameContext to support
IPA specific frame context implementations shall inherit from the
IPAFrameContext base class to support..
> + * the minimum required features for a FrameContext, including the frame number
> + * and error flags that relate to the frame.
> + *
> + * FrameContexts are overwritten when they are recycled and re-initialised by
> + * the first access made on them by either initialise(frame) or get(frame). If a
That's what a circular array does.
I would rather express the fact that the number of available contexts
is required to be larger than the platform pipeline depth (with a
\todo to reference the property once we have it defined). After
pipelineDepth frames have been processed the FrameContext is recycled
and forever lost.
> + * FrameContext is first accessed through get(frame) before calling initialise()
> + * a PFCError is automatically raised on the FrameContext to be transferred to
> + * the Request when it completes.
This would happen because we have a request underrun, right ?
I would state that. Like:
In the case an application does not queue requests to the Camera fast
enough, frames can be produced and processed by the IPA without a
corresponding Request being queued. In this case the IPA algorithm
will try to access the FrameContext with a call to get() before it
had been initialized at queueRequest() time. In this case there
is now way the controls associated with the late Request could be
applied in time, as the frame as already been processed by the IPA,
the PFCError flag is automatically raised on the FrameContext.
How does it sound ?
> + */
> +
> +/**
> + * \fn FCQueue::clear()
> + * \brief Reinitialise all data on the queue
Or "Clear the queue content" ?
> + *
> + * Reset the queue and ensure all FrameContext slots are re-initialised.
I would add that the Queue has to be re-initialized at every streaming
session start, likely in IPA::configure()
> + */
> +
> +/**
> + * \fn FCQueue::initialise(uint32_t frame)
> + * \brief Initialize and return the Frame Context at slot specified by \a frame
> + * \param[in] frame The frame context sequence number
> + *
> + * The first call to obtain a FrameContext from the FCQueue should be handled
> + * through this call. The FrameContext will be initialised for the frame and
> + * returned to the caller if it was not already initialised.
> + *
> + * If the FrameContext was already initialized for this sequence, a warning will
> + * be reported and the previously initialized FrameContext is returned.
> + *
Should we say it is expected to be called at queueRequest() time ?
> + * \return A reference to the FrameContext for sequence \a frame
> + */
> +
> +/**
> + * \fn FCQueue::get()
> + * \brief Obtain the Frame Context at slot specified by \a frame
> + * \param[in] frame The frame context sequence number
> + *
> + * Obtains an existing FrameContext from the queue and returns it to the caller.
> + *
> + * If the FrameContext is not correctly intiialised for the \a frame, it will be
s/intiialised/initialised/
> + * initialised and a PFCError will be flagged on the context to be transferred
> + * to the Request when it completes.
> + *
> + * \return A reference to the FrameContext for sequence \a frame
> + */
> +
> +} /* namespace ipa */
> +
> +} /* namespace libcamera */
> diff --git a/src/ipa/libipa/fc_queue.h b/src/ipa/libipa/fc_queue.h
> new file mode 100644
> index 000000000000..82ce36811926
> --- /dev/null
> +++ b/src/ipa/libipa/fc_queue.h
> @@ -0,0 +1,93 @@
> +/* SPDX-License-Identifier: LGPL-2.1-or-later */
> +/*
> + * Copyright (C) 2022, Google Inc.
> + *
> + * fc_queue.h - IPA Frame context queue
> + *
Unecessary empty line
> + */
> +
> +#pragma once
> +
> +#include <array>
> +
> +#include <libcamera/base/log.h>
> +
> +#include <libcamera/controls.h>
Not needed it seems
> +
> +namespace libcamera {
> +
> +LOG_DECLARE_CATEGORY(FCQueue)
> +
> +namespace ipa {
> +
> +/*
> + * Maximum number of frame contexts to be held onto
> + *
> + * \todo Should be larger than ISP delay + sensor delay
> + */
> +static constexpr uint32_t kMaxFrameContexts = 16;
> +
> +template<typename FrameContext>
> +class FCQueue : public std::array<FrameContext, kMaxFrameContexts>
> +{
> +private:
> + void initialise(FrameContext &frameContext, const uint32_t frame)
> + {
> + frameContext = {};
> + frameContext.frame = frame;
> + }
> +
> +public:
> + void clear()
> + {
> + this->fill({});
> + }
> +
> + FrameContext &initialise(const uint32_t frame)
> + {
> + FrameContext &frameContext = this->at(frame & kMaxFrameContexts);
> +
> + /*
> + * Do not re-initialise if a get() call has already fetched this
> + * frame context to preseve the error flags already raised.
> + */
> + if (frame == frameContext.frame && frame != 0) {
This should be <= as it needs to catch cases where the frame context
has been possibile overwritten by algorithms calling get() for a
number of times larger than the pipeline depth.
> + LOG(FCQueue, Warning)
> + << "Frame " << frame << " already initialised";
> + } else {
> + initialise(frameContext, frame);
> + }
No brances needed it seems
> +
> + return frameContext;
> + }
> +
> + FrameContext &get(uint32_t frame)
> + {
> + FrameContext &frameContext = this->at(frame & kMaxFrameContexts);
> +
> + if (frame != frameContext.frame) {
Or if (frame == frameContext.frame)
return frameContext;
To save one indentation level. Up to you.
> + LOG(FCQueue, Warning)
> + << "Obtained an uninitialised FrameContext for "
> + << frame;
> +
> + initialise(frameContext, frame);
> +
> + /*
> + * The frame context has been retrieved before it was
> + * initialised through the initialise() call. This
> + * indicates an algorithm attempted to access a Frame
> + * context before it was queued to the IPA.
> + *
> + * Controls applied for this request may be left
> + * unhandled.
> + */
> + frameContext.error |= Request::PFCError;
> + }
> +
> + return frameContext;
> + }
> +};
> +
> +} /* namespace ipa */
> +
> +} /* namespace libcamera */
> diff --git a/src/ipa/libipa/meson.build b/src/ipa/libipa/meson.build
> index fb894bc614af..016b8e0ec9be 100644
> --- a/src/ipa/libipa/meson.build
> +++ b/src/ipa/libipa/meson.build
> @@ -3,6 +3,7 @@
> libipa_headers = files([
> 'algorithm.h',
> 'camera_sensor_helper.h',
> + 'fc_queue.h',
> 'histogram.h',
> 'module.h',
> ])
> @@ -10,6 +11,7 @@ libipa_headers = files([
> libipa_sources = files([
> 'algorithm.cpp',
> 'camera_sensor_helper.cpp',
> + 'fc_queue.cpp',
> 'histogram.cpp',
> 'module.cpp',
> ])
> --
> 2.34.1
>
More information about the libcamera-devel
mailing list