[libcamera-devel] [PATCH v1 2/4] ipa: ipu3: ipa_context: Extend FCQueue::get()
Jacopo Mondi
jacopo at jmondi.org
Fri Jun 10 12:32:01 CEST 2022
Hi Umang,
On Fri, Jun 10, 2022 at 11:46:20AM +0200, Umang Jain wrote:
> Hi Jacopo
>
> On 6/9/22 18:20, Jacopo Mondi wrote:
> > Hi Umang,
> >
> > On Thu, Jun 09, 2022 at 01:09:28AM +0200, Umang Jain wrote:
> > > Hi Jacopo,
> > >
> > > Thanks for the review.
> > >
> > > On 6/8/22 15:56, Jacopo Mondi wrote:
> > > > Hi Umang,
> > > >
> > > > On Fri, Jun 03, 2022 at 03:22:57PM +0200, Umang Jain via libcamera-devel wrote:
> > > > > Extend the FCQueue::get() to return a IPAFrameContext for a
> > > > > non-existent frame. The .get() should be able to figure out if a
> > > > > existent frame context is asked for, or to create a new frame context
> > > > > based on the next available position. To keep track of next available
> > > > > position in the queue, use of head and tail pointer are used.
> > > > >
> > > > > We specifically want to have access to the queue through the
> > > > > .get() function hence operator[] is deleted for FCQueue as
> > > > > part of this patch as well.
> > > > >
> > > > > Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
> > > > > ---
> > > > > src/ipa/ipu3/ipa_context.cpp | 95 +++++++++++++++++++++++++++++++++---
> > > > > src/ipa/ipu3/ipa_context.h | 9 ++++
> > > > > src/ipa/ipu3/ipu3.cpp | 4 +-
> > > > > 3 files changed, 100 insertions(+), 8 deletions(-)
> > > > >
> > > > > diff --git a/src/ipa/ipu3/ipa_context.cpp b/src/ipa/ipu3/ipa_context.cpp
> > > > > index 9f95a61c..2438d68d 100644
> > > > > --- a/src/ipa/ipu3/ipa_context.cpp
> > > > > +++ b/src/ipa/ipu3/ipa_context.cpp
> > > > > @@ -222,13 +222,33 @@ IPAFrameContext::IPAFrameContext(uint32_t id, const ControlList &reqControls)
> > > > > * \brief A FIFO circular queue holding IPAFrameContext(s)
> > > > > *
> > > > > * FCQueue holds all the IPAFrameContext(s) related to frames required
> > > > > - * to be processed by the IPA at a given point.
> > > > > + * to be processed by the IPA at a given point. An IPAFrameContext is created
> > > > > + * on the first call FCQueue::get(frame) for that frame. Subsequent calls to
> > > > > + * FCQueue::get() with the same frame number shall return the IPAFrameContext
> > > > > + * previously created until the frame is marked as complete through
> > > > > + * FCQueue::completeFrame(frame).
> > > > > + */
> > > > > +
> > > > > +/**
> > > > > + * \var FCQueue::head_
> > > > > + * \brief A pointer to the a IPAFrameContext next expected to complete
> > > > > + */
> > > > > +
> > > > > +/**
> > > > > + * \var FCQueue::tail_
> > > > > + * \brief A pointer to the latest IPAFrameContext created
> > > > > + */
> > > > > +
> > > > > +/**
> > > > > + * \var FCQueue::isFull_
> > > > > + * \brief Flag set when the FCQueue is full
> > > > > */
> > > > >
> > > > > /**
> > > > > * \brief FCQueue constructor
> > > > > */
> > > > > FCQueue::FCQueue()
> > > > > + : head_(nullptr), tail_(nullptr), isFull_(false)
> > > > > {
> > > > > clear();
> > > > > }
> > > > > @@ -238,21 +258,75 @@ FCQueue::FCQueue()
> > > > > * \param[in] frame Frame number for which the IPAFrameContext needs to
> > > > > * retrieved
> > > > > *
> > > > > - * \return Pointer to the IPAFrameContext
> > > > > + * This function returns the IPAFrameContext for the desired frame. If the
> > > > > + * frame context does not exist in the queue, the next available slot in the
> > > > > + * queue is returned. It is the responsibility of the caller to fill the correct
> > > > > + * IPAFrameContext parameters of newly returned IPAFrameContext.
> > > > > + *
> > > > > + * \return Pointer to the IPAFrameContext or nullptr if frame context couldn't
> > > > > + * be created
> > > > > */
> > > > > IPAFrameContext *FCQueue::get(uint32_t frame)
> > > > > {
> > > > > - IPAFrameContext &frameContext = this->at(frame % kMaxFrameContexts);
> > > > > + if (frame <= tail_->frame) {
> > > > How does this work ? The first get() you call after construction has tail_
> > > > == nullptr. How come this doesn't segfault ? Is it because there's a
> > > > call to clear() that initializes the pointers before usage ?
> > > > Shouldn't the constructor take care of creating a usable object
> > > > without requiring clear() to be called ?
> > >
> > > Yes, bad naming. I think reset() would be more appropriate? The constructor
> > > is
> > > responsible yes (hence it calls clear() in the first place) so it was the
> > I missed the call to clear() in the constructor and I thought this
> > worked because of the clear() call in IPA::configure(). Sorry, this is
> > ok I guess.
>
>
> Ack
>
> >
> > > matter of
> > > code-deduplication. We can discuss the naming conventions but tail_
> > > shouldn't
> > > be a nullptr before any .get() calls. So I do want proper initialization
> > > plus, a
> > > clear() or reset() to clear the ring buffer and resetting the tail_, head_
> > > etc.
> > >
> > > > Also, are we sure using the frame number in tail_ and head_ is the best
> > > > way to ensure that we actually track where we are in the queue ?
> > > >
> > > > I have a few worries:
> > > >
> > > > 1) are frame numbers always starting from 0 ?
> > >
> > > It should be, no?
> > >
> > I would say that it depends on how the kernel driver counts the frame
> > numbers. If the MIPI CSI-2 frame number is used it will count from 1
> > and increment per-virtual channel. If the driver maintains an internal
> > counter it should be reset at every start_stream/stop_stream session,
> > but I don't this there are guarantees if not looking at the driver and
> > making sure it does the right thing ?
> >
> > However I now also recall Kieran had a patch on his FrameSequence
> > series to restart counting from 0 the frame sequence number in
> > libcamera, do we assume they will always start from 0 because of this?
> >
> > > > 2) frame numbers are monotonically increasing, but can have gaps.
> > > > When you create a new frame context you increase by one to get the
> > > > next slot, but when you get an existing frame you compute the index
> > > > by doing frame % kMaxFrameContexts
> > > >
> > > > IPAFrameContext *FCQueue::get(uint32_t frame) {
> > > >
> > > > if (frame <= tail_->frame)
> > > > /* GET */
> > > > IPAFrameContext &frameContext = this->at(frame % kMaxFrameContexts);
> > > > else
> > > > /* PUSH */
> > > > tail_ = &this->at((tail_->frame + 1) % kMaxFrameContexts);
> > > > tail_->frame = frame;
> > > >
> > > > Isn't there a risk you get the wrong frame ?
> > >
> > > Yes, I've realized I have made an error here after posting to the list.
> > > I put the IPAFrameContext on the next slot immediate to tail_ , but that's
> > > not correct. It's only correct if we ensure there are not any gaps (majority
> > > of the
> > > development has been done by assuming that there will not be gaps for now).
> > >
> > > Gaps / Frame drops is yet another beast to handle. I guess I am keeping it
> > > separate
> > > from the "per-frame controls" planning for now. I discussed the same with
> > > Kieran
> > > the other day - that the frame-drop handling and per-frame controls need to
> > > kept
> > > separate for progress. Otherwise both half-baked designs, trying to
> > > satisfying/handle
> > > each other arbitrarily might create chicken-and-egg problems.
> > Frame drops had been biting us hard enough already. I think we should
> > take them into account from the beginning in order to avoid having to
> > re-think how to handle them later..
> >
> > That's why I think we need to define how mapping the frame number to
> > the intended slot and do so uniquely in both "get" and "push". The
> > current "frame % kMaxFrameContexts" is enough (it will only cause
> > problems if the number of dropped frames in a kMaxFrameContexts period
> > is larger than the queue depth I think).
> > > > (also being this a LIFO, isn't the head the most recent and the
> > Sorry, I clearly meant FIFO
> >
> > > > tail the oldest entry ? you seem to advance tail when you push a
> > > > new frame)
> > >
> > > No, head_ represents the oldest entry and tail_ represents the latest
> > > IPAFrameContext
> > > that got created (refer documentation in this patch).
> > >
> > Mine was mostly a comment on the general concept, not as much as the
> > documentation of what you've done :) My thought was that in a stack
> > (LIFO) you pop the head and in a queue (FIFO) you pop the tail (and
> > consequentlly adavance the head when you push a new context).
> >
> > Basically this:
> > https://softwareengineering.stackexchange.com/questions/144477/on-a-queue-which-end-is-the-head
> >
> > However STL seems to use "front" and "back" for queues [2] as
> > synonymous for your head and tail, so I guess it's fine the way you
> > have it (you could use "front" and "back" to stay closer to STL)
> >
> > [2] https://en.cppreference.com/w/cpp/container/queue
> >
> > > > 2 ) tail_ gets initialized with an empty IPAFrameContext whose constructor
> > > > is
> > > > IPAFrameContext::IPAFrameContext() = default;
> > > >
> > > > hence its frame id is not intialized, or are POD types default
> > > > initialized in C++ ?
> > >
> > > We manually give it a value of '0' in clear(). It should work out from
> > > there.
> > Right. Again careful that if frame numbers are numbered using the
> > CSI-2 frame number, it will count from 1.
> >
> > > The .get() calls will over-write the frame number while creating the
> > > IPAFrameContext(s),
> > > so I don't think it will be a problem as such..
> > >
> > > > Anyway, isn't it simpler to use plain counters for head and tail instead
> > > > of pointers to the contained objects ? (This would maybe make
> > > > complicated to generalize the libcamera::RingBuffer implementation
> > > > maybe), but head_ and tail_ mainly serve for two purpose:
> > > > - underflow detection (trying to complete a frame not yet queued)
> > > > - overflow detection (trying to queue a frame overwrites a
> > > > not-yet-consumed one)
> > >
> > > Well, the main point for having these pointers is to know if a
> > > IPAFrameContext exists in the first
> > > place or not. The underflow/overflow checks comes later (... and we need
> > Well, you have this to find out if a frame context is the "right" one
> >
> > IPAFrameContext &frameContext = this->at(frame % kMaxFrameContexts);
> > if (frame != frameContext.frame)
> > LOG(IPAIPU3, Warning)
> > << "Got wrong frame context for frame " << frame;
> >
> > But the distinction between a "push" and a "get" is just
> >
> > if (frame <= tail_->frame)
> >
> > which could be very well realized with integers.
> >
> > Anyway, just a suggestion to have the implementation possibly simpler
> >
> >
> > > have to a
> > > additional head_ for that, otherwise simply a tail_ would have been
> > > sufficient for the former)
> > >
> > > I agree with you that plain counters would be sufficient (and it doesn't
> > > really make a difference
> > > to me, either you store pointers OR frame numbers of oldest's and latest's).
> > > It is just storing
> > > a unique handles somehow.
> > >
> > > > Can't we have head and tail simply follow the latest frame number that
> > > > have been queued and the lastest frame number that has been consumed
> > > > respectively ?
> > > >
> > > > Collision detection will simply be
> > > > - undeflow: tail + 1 == head
> > >
> > > rather should be head + 1 == tail (according to how tail and head are used
> > > in this patch)
> > Yeah, I was using the notion I had in my head. Must be biased by the
> > dog metaphore in the link above :)
>
>
> A dog metaphor :D
>
> >
> > > > - overflow (queue frame): head - tail == array size
> > > >
> > > > The actual position on the array can always be computed as (frame %
> > > > kMaxFrameContexts)
> > > >
> > > > This doesn't however work well with gaps, as one frame gap means we're
> > > > actually not using one slot, so a little space is wasted. Ofc as the
> > > > number of gaps approaches the number of available slots, the risk of
> > > > overflow increases. But gaps should be an exceptional events and with
> > > > large enough buffers this shouldn't be a problem ?
> > >
> > > To be honest, I don't think storing IPAFrameContext pointers vs frame
> > > numbers
> > > should be a major concern. I say this because intrinsically everything
> > > revolves
> > > around the frame number in both cases.
> > >
> > > Going forward (and it's only my educated guess), storing head and tail frame
> > > numbers will get limiting a bit. I need to see how Kieran's work on
> > > merging/retaining
> > > controls is going on. The idea is controls from latest IPAFrameContext gets
> > > retained
> > > into next-created IPAFrameContext(s) and so on... If you think about it, the
> > > tail_->controls
> > > will get copied into the next IPAFrameContext while being created. In cases
> > > like this,
> > > having IPAFrameContexts pointers are useful in my opinion.
> > >
> > I don't think that's an issue as head and tail will simply allow you
> > get the context and from there you can do whatever you want.
> > Similarly, from the frame context you can get the frame number, so
> > yes, whatever you prefer for now
> >
> > > > Also I wonder if a push/get interface wouldn't be simpler, with new
> > > > reuests being pushed() and frames consumed with get(), but that's more
> > > > an implementation detail maybe..
> > >
> > > I do wondered that as well, but in my opinion having a push() + get()
> > > interface also means,
> > > each algorithm has to do various checks on their part. For e.g.
> > >
> > > Algorithm1:
> > >
> > > .get(X) <--- Failed
> > > .push(XFrameContext)
> > > .get(X) <---- Success and carry on
> > >
> > > Algorithm2:
> > >
> > > .get(X) <-- Success because Algorithm1 created XFrameContext
> > > // but you still need to write failure path here containing
> > > .push(XFrameContext)
> > >
> > > .. and so on.
> > >
> > > Also, various Algorithm might need to create different frame's
> > > IPAFrameContext in a single run,
> > > depending on their latencies.
> > >
> > > So I think we are unnecessarily outsourcing the responsibility of "pushing"
> > > the IPAFrameContext
> > > to the algorithms. All this can be encapsulated in the .get(), no? I thought
> > > we all agreed on
> > > the .get() design, so hence this direction.
> > >
> > In case of requests underrun the algorithms would try to access a
> > non-existing frame context, hence their first "get()" will have to
> > create one. Indeed having a get that creates entries blurries the line
>
>
> Yes, it's expected behavior for algorithms to access a non-existent frame
> context. It will get created and the algorithm will populate its value into
> the frame-context even before the frame is queued up.
>
> Yes, in underrun, we will need to notify the application about it as soon as
> possible (we have some discussion in PFC Error v2) so let it get cleared up.
> It would be interesting to see how we recover up - from the underruns...
>
> > between a push and a get enough to justify using a single function.
> >
> > > > IPA components cannot have tests right ? It would be nice to have a
> > > > unit test for this component to make sure it behaves as intended
> > > > instead of having to debug it "live"
> > >
> > > I see that you have mentioned a desire to make a generic
> > > libcamera::RingBuffer
> > > class implementation. While I do agree on the point of tests, but I am not
> > > looking
> > > at this angle just yet. It feels to me a bit early to do so because things
> > > can be very
> > > specific w.r.t IPAs. Even if we do it "generically" right now, only IPU3
> > > would be the
> > > only user I think. There are other similar parts that we want to provide a
> > > generic
> > > implementation to all the IPAs for e.g. IPAContext, IPAFrameContexts and so
> > > on,
> > > so probably once we have a good usage across multiple IPAs, we would be in a
> > > better position to write a generic ring buffer implementation then and adapt
> > > the IPAs on top of it?
> > >
> > As I said I was thinking about other components outside of the IPAs
> > that could benefit from this as well. But I agree getting to have a
> > first user is the first step to later eventually generalize.
>
>
> Ack
>
> >
> > > > sorry, a lot of questions actually..
> > >
> > > No issues ;-)
> > >
> > So it seems to me that the only remaining concerns are actually:
> >
> > 1) Map uniquely the frame number to the slot index
> >
> > 2) Clarify if it can be assumed frames always start from 0. This is
>
>
> So I have been thinking on this, and it seems it should be okay even if
> frame doesn't start from '0'.
>
> For e.g. let's assume the FCQueue size is 16 and first frame sequence comes
> to be 11 (or any number really).
>
> What shall happen?
>
> In IPA::queueRequest(), frame context #11 not found - so a new one is
> created and tail(or the latest frame counter) is assigned to that.
>
> So the first 10 slots will remained un-initialised (as a result of clear())
> until the next 16 (FCQueue.size()) frames are queued up and then everything
> circulates accordingly from FCqueue point-of-view then.
>
> Now the question is what if something tries to access those un-initialised
> 10 frame contexts. The probable contenders to that would be algorithms_ in
> IPAIPU3. The Algorithm::prepare() doesn't have a frame number - so probably
> it's independent in its own way ? (I am not sure, have asked Jean-M. for
> that) and Algorithm::process() works off a frame number (in 4/4), so we are
> in control which frame context is accessed by the algorithms there. So I
> think it should be fine to have a transient situation of un-initialised
> frame contexts. If we really want to prevent access, I guess it shouldn't be
> that hard to detect this situation and block access to these frame-contexts.
>
> As long as the sequence number comes in incremental order of '1' - it should
> be fine even if the sequence does _not_ start from '0'.
>
Thanks for the analysis.
My concern is however not that much on unused slots (starting from any
arbitrary number should not be an issue, this is a circular buffer
after all) but regarding how to match Request numbers and frame
numbers, as I'm under the probably false impression that we assume
they both start from 0 (and increment at the same pace ?)
Request has a sequence number incremented per-camera each time a new
request is queued. (it is not reset by a camera start()/stop() it
seems, but I guess this was intentional ?)
The IPU3 pipeline handler use the Request number to create IPU3Frames::Info
see IPU3CameraData::queuePendingRequests() where the frame info is
first created for a new request
IPU3Frames::Info *IPU3Frames::create(Request *request)
{
unsigned int id = request->sequence();
info->id = id;
}
The info->id (which carries the request sequence number) is used as
'frame id' to all operations towards the IPA
ipa_->queueRequest(info->id, ..)
ipa_->fillParamsBuffer(info->id, ..)
ipa_->processStatsBuffer(info->id, ..)
processStatsBuffer() in particular runs all the algorithms with the
frame context for a "request sequence number" and produces the
controls to be applied on the sensor providing it the request sequence
void IPU3CameraData::setSensorControls([[maybe_unused]] unsigned int id,
As the [[maybe_unused]] suggests we don't currently use the request
id, but going forward I assume we want pass back the pipeline the
frame sequence id to which the computed controls apply to. Right now
this information is deduced using the Request sequence, hence my
assumption that currently assume they both start from 0 and increment
at the same pace ?
I have a gut feeling we'll have the same problem when having to detect
frame drops, if we want a model where if frame X has been skept, then
request X should be returned with error.
So yes, this all might be not be a concern for the FCQ itself, which
just wants a numeric index without caring about what it represents,
but I feel that we should start thinking sooner than later about how
to associate the request id and the frame sequence uniquely in the
PH/IPA. Maybe this was already a known point and I have just realized
it now ? Well, it will stay written form at least :)
Thanks
j
> If it comes in incremental order > 1, then surely we'll have gaps as
> discussed previously, but that's for later / 'frame drop handling' I think.
>
> > desirable as in the current model where frames start being
> > produced when enough buffers have been queued, the FCQ will be
> > filled with requests numbered from 0 on, while the first frame
> > could potentially have an arbitrary value. Is that handled by
> > Kieran's series from december ? (sorry, I lost track of all the
> > moving parts).
> >
> > Thanks
> > j
> >
> > > > > + IPAFrameContext &frameContext = this->at(frame % kMaxFrameContexts);
> > > > > + if (frame != frameContext.frame)
> > > > > + LOG(IPAIPU3, Warning)
> > > > > + << "Got wrong frame context for frame " << frame;
> > > > > +
> > > > > + return &frameContext;
> > > > > + } else {
> > > > > + if (isFull_) {
> > > > > + LOG(IPAIPU3, Warning)
> > > > > + << "Cannot create frame context for frame " << frame
> > > > > + << " since FCQueue is full";
> > > > > +
> > > > > + return nullptr;
> > > > > + }
> > > > > +
> > > > > + /*
> > > > > + * Frame context doesn't exist yet so get the next available
> > > > > + * position in the queue.
> > > > > + */
> > > > > + tail_ = &this->at((tail_->frame + 1) % kMaxFrameContexts);
> > > > > + tail_->frame = frame;
> > > > > +
> > > > > + /* Check if the queue is full to avoid over-queueing later */
> > > > > + if (tail_->frame - head_->frame >= kMaxFrameContexts - 1)
> > > > > + isFull_ = true;
> > > > >
> > > > > - if (frame != frameContext.frame) {
> > > > > + return tail_;
> > > > > + }
> > > > > +}
> > > > > +
> > > > > +/**
> > > > > + * \brief Notifies the FCQueue that a frame has been completed
> > > > > + * \param[in] frame The completed frame number
> > > > > + */
> > > > > +void FCQueue::completeFrame(uint32_t frame)
> > > > > +{
> > > > > + if (head_->frame != frame)
> > > > > LOG(IPAIPU3, Warning)
> > > > > - << "Got wrong frame context for frame" << frame
> > > > > - << " or frame context doesn't exist yet";
> > > > > + << "Frame " << frame << " completed out-of-sync?";
> > > > > +
> > > > > + if (frame > tail_->frame) {
> > > > > + LOG(IPAIPU3, Error)
> > > > > + << "Completing a frame " << frame
> > > > > + << " not present in the queue is disallowed";
> > > > > + return;
> > > > > }
> > > > >
> > > > > - return &frameContext;
> > > > > + head_ = this->get(frame + 1);
> > > > > +
> > > > > + if (isFull_)
> > > > > + isFull_ = false;
> > > > > }
> > > > >
> > > > > +/**
> > > > > + * \fn FCQueue::isFull()
> > > > > + * \brief Checks whether the frame context queue is full
> > > > > + */
> > > > > +
> > > > > /**
> > > > > * \brief Clear the FCQueue by resetting all the entries in the ring-buffer
> > > > > */
> > > > > @@ -260,6 +334,13 @@ void FCQueue::clear()
> > > > > {
> > > > > IPAFrameContext initFrameContext;
> > > > > this->fill(initFrameContext);
> > > > > +
> > > > > + isFull_ = false;
> > > > > +
> > > > > + /* Intialise 0th index to frame 0 */
> > > > > + this->at(0).frame = 0;
> > > > > + tail_ = &this->at(0);
> > > > > + head_ = tail_;
> > > > > }
> > > > >
> > > > > } /* namespace ipa::ipu3 */
> > > > > diff --git a/src/ipa/ipu3/ipa_context.h b/src/ipa/ipu3/ipa_context.h
> > > > > index 56d281f6..475855da 100644
> > > > > --- a/src/ipa/ipu3/ipa_context.h
> > > > > +++ b/src/ipa/ipu3/ipa_context.h
> > > > > @@ -93,9 +93,18 @@ class FCQueue : public std::array<IPAFrameContext, kMaxFrameContexts>
> > > > > {
> > > > > public:
> > > > > FCQueue();
> > > > > + FCQueue &operator[](const FCQueue &) = delete;
> > > > >
> > > > > void clear();
> > > > > + void completeFrame(uint32_t frame);
> > > > > IPAFrameContext *get(uint32_t frame);
> > > > > + bool isFull() { return isFull_; }
> > > > > +
> > > > > +private:
> > > > > + IPAFrameContext *head_;
> > > > > + IPAFrameContext *tail_;
> > > > > +
> > > > > + bool isFull_;
> > > > > };
> > > > >
> > > > > struct IPAContext {
> > > > > diff --git a/src/ipa/ipu3/ipu3.cpp b/src/ipa/ipu3/ipu3.cpp
> > > > > index 0843d882..1d6ee515 100644
> > > > > --- a/src/ipa/ipu3/ipu3.cpp
> > > > > +++ b/src/ipa/ipu3/ipu3.cpp
> > > > > @@ -605,6 +605,8 @@ void IPAIPU3::processStatsBuffer(const uint32_t frame,
> > > > > */
> > > > >
> > > > > metadataReady.emit(frame, ctrls);
> > > > > +
> > > > > + context_.frameContexts.completeFrame(frame);
> > > > > }
> > > > >
> > > > > /**
> > > > > @@ -618,7 +620,7 @@ void IPAIPU3::processStatsBuffer(const uint32_t frame,
> > > > > void IPAIPU3::queueRequest(const uint32_t frame, const ControlList &controls)
> > > > > {
> > > > > /* \todo Start processing for 'frame' based on 'controls'. */
> > > > > - context_.frameContexts[frame % kMaxFrameContexts] = { frame, controls };
> > > > > + *context_.frameContexts.get(frame) = { frame, controls };
> > > > > }
> > > > >
> > > > > /**
> > > > > --
> > > > > 2.31.1
> > > > >
More information about the libcamera-devel
mailing list