[libcamera-devel] [PATCH 4/4] utils: rkisp1: Support optional CSI-2 receiver subdev

[Laurent Pinchart]

The media graph may include a CSI-2 receiver entity between the sensor
and the ISP for platforms that have a CSI-2 receiver external to the
ISP. Support this by configuring the pipeline accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 utils/rkisp1/rkisp1-capture.sh | 56 +++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/utils/rkisp1/rkisp1-capture.sh b/utils/rkisp1/rkisp1-capture.sh
index 2549779d0f78..c5f859f21001 100755
--- a/utils/rkisp1/rkisp1-capture.sh
+++ b/utils/rkisp1/rkisp1-capture.sh
@@ -14,6 +14,37 @@
 # - raw2rgbpnm (from git://git.retiisi.org.uk/~sailus/raw2rgbpnm.git)
 # - yavta (from git://git.ideasonboard.org/yavta.git)
 
+# Return the entity connected to a given pad
+# $1: The pad, expressed as "entity":index
+mc_remote_entity() {
+	local entity="${1%:*}"
+	local pad="${1#*:}"
+
+	${mediactl} -p | awk '
+/^- entity / {
+	in_entity=0
+}
+
+/^- entity [0-9]+: '"${entity}"' / {
+	in_entity=1
+}
+
+/^[ \t]+pad/ {
+	in_pad=0
+}
+
+/^[ \t]+pad'"${pad}"': / {
+	in_pad=1
+}
+
+/^[ \t]+(<-|->) "[^"]+"/ {
+	if (in_entity && in_pad) {
+		print gensub(/^[^"]+"([^"]+)":([0-9]+).*$/, "\\1", "g")
+		exit
+	}
+}'
+}
+
 # Locate the sensor entity
 find_sensor() {
 	local bus
@@ -28,6 +59,17 @@ find_sensor() {
 	echo "$sensor_name $bus"
 }
 
+# Locate the CSI-2 receiver
+find_csi2_rx() {
+	local sensor_name=$1
+	local csi2_rx
+
+	csi2_rx=$(mc_remote_entity "$sensor_name:0")
+	if [ "$csi2_rx" != rkisp1_isp ] ; then
+		echo "$csi2_rx"
+	fi
+}
+
 # Locate the media device
 find_media_device() {
 	local mdev
@@ -63,15 +105,27 @@ configure_pipeline() {
 	local format="fmt:$sensor_mbus_code/$sensor_size"
 	local capture_mbus_code=$1
 	local capture_size=$2
+	local csi2_rx
 
 	echo "Configuring pipeline for $sensor in $format"
 
+	csi2_rx=$(find_csi2_rx "$sensor")
+
 	$mediactl -r
 
-	$mediactl -l "'$sensor':0 -> 'rkisp1_isp':0 [1]"
+	if [ -n "$csi2_rx" ] ; then
+		$mediactl -l "'$sensor':0 -> '$csi2_rx':0 [1]"
+		$mediactl -l "'$csi2_rx':1 -> 'rkisp1_isp':0 [1]"
+	else
+		$mediactl -l "'$sensor':0 -> 'rkisp1_isp':0 [1]"
+	fi
 	$mediactl -l "'rkisp1_isp':2 -> 'rkisp1_resizer_mainpath':0 [1]"
 
 	$mediactl -V "\"$sensor\":0 [$format]"
+	if [ -n "$csi2_rx" ] ; then
+		$mediactl -V "'$csi2_rx':0 [$format]"
+		$mediactl -V "'$csi2_rx':1 [$format]"
+	fi
 	$mediactl -V "'rkisp1_isp':0 [$format crop:(0,0)/$sensor_size]"
 	$mediactl -V "'rkisp1_isp':2 [fmt:$capture_mbus_code/$sensor_size crop:(0,0)/$sensor_size]"
 	$mediactl -V "'rkisp1_resizer_mainpath':0 [fmt:$capture_mbus_code/$sensor_size crop:(0,0)/$sensor_size]"
-- 
Regards,

Laurent Pinchart