[libcamera-devel] [PATCH v2 4/4] libcamera: rpi: Handle SensorConfiguration
Naushir Patuck
naush at raspberrypi.com
Tue Aug 1 11:02:15 CEST 2023
Hi Jacopo,
Thanks for the update. Just one minor comment:
On Mon, 31 Jul 2023 at 12:31, Jacopo Mondi via libcamera-devel
<libcamera-devel at lists.libcamera.org> wrote:
>
> Handle the SensorConfiguration provided by the application in the
> pipeline validate() and configure() call chains.
>
> During validation, first make sure SensorConfiguration is valid, then
> handle it to compute the sensor format.
>
> For the VC4 platform where the RAW stream follows the sensor's
> configuration adjust the RAW stream configuration to match the sensor
> configuration.
>
> Signed-off-by: Jacopo Mondi <jacopo.mondi at ideasonboard.com>
> ---
> .../pipeline/rpi/common/pipeline_base.cpp | 62 ++++++++++++++++---
> .../pipeline/rpi/common/pipeline_base.h | 4 +-
> src/libcamera/pipeline/rpi/vc4/vc4.cpp | 30 ++++++++-
> 3 files changed, 82 insertions(+), 14 deletions(-)
>
> diff --git a/src/libcamera/pipeline/rpi/common/pipeline_base.cpp b/src/libcamera/pipeline/rpi/common/pipeline_base.cpp
> index 97acafbbb728..15c7a5c72bdd 100644
> --- a/src/libcamera/pipeline/rpi/common/pipeline_base.cpp
> +++ b/src/libcamera/pipeline/rpi/common/pipeline_base.cpp
> @@ -180,6 +180,11 @@ CameraConfiguration::Status RPiCameraConfiguration::validate()
> if (config_.empty())
> return Invalid;
>
> + if (!sensorConfig.valid()) {
> + LOG(RPI, Error) << "Invalid sensor configuration request";
> + return Invalid;
> + }
> +
> status = validateColorSpaces(ColorSpaceFlag::StreamsShareColorSpace);
>
> /*
> @@ -207,19 +212,43 @@ CameraConfiguration::Status RPiCameraConfiguration::validate()
> std::sort(outStreams.begin(), outStreams.end(),
> [](auto &l, auto &r) { return l.cfg->size > r.cfg->size; });
>
> - /* Compute the sensor configuration. */
> - unsigned int bitDepth = defaultRawBitDepth;
> - if (!rawStreams.empty()) {
> + /* Compute the sensor's format then do any platform specific fixups. */
> + unsigned int bitDepth;
> + Size sensorSize;
> +
> + if (sensorConfig) {
> + /* Use the application provided sensor configuration. */
> + bitDepth = sensorConfig.bitDepth;
> + sensorSize = sensorConfig.outputSize;
> + } else if (!rawStreams.empty()) {
> + /* Use the RAW stream format and size. */
> BayerFormat bayerFormat = BayerFormat::fromPixelFormat(rawStreams[0].cfg->pixelFormat);
> bitDepth = bayerFormat.bitDepth;
> + sensorSize = rawStreams[0].cfg->size;
> + } else {
> + bitDepth = defaultRawBitDepth;
> + sensorSize = outStreams[0].cfg->size;
> }
>
> - sensorFormat_ = data_->findBestFormat(rawStreams.empty() ? outStreams[0].cfg->size
> - : rawStreams[0].cfg->size,
> - bitDepth);
> + sensorFormat_ = data_->findBestFormat(sensorSize, bitDepth);
> +
> + /*
> + * If a sensor configuration has been requested, it should apply
> + * without modifications.
> + */
> + if (sensorConfig) {
> + BayerFormat bayer = BayerFormat::fromMbusCode(sensorFormat_.mbus_code);
> +
> + if (bayer.bitDepth != sensorConfig.bitDepth ||
> + sensorFormat_.size != sensorConfig.outputSize) {
> + LOG(RPI, Error) << "Invalid sensor configuration: "
> + << "bitDepth/size mismatch";
> + return Invalid;
> + }
> + }
>
> /* Do any platform specific fixups. */
> - status = data_->platformValidate(rawStreams, outStreams);
> + status = data_->platformValidate(this, rawStreams, outStreams);
> if (status == Invalid)
> return Invalid;
>
> @@ -467,12 +496,25 @@ int PipelineHandlerBase::configure(Camera *camera, CameraConfiguration *config)
> std::sort(ispStreams.begin(), ispStreams.end(),
> [](auto &l, auto &r) { return l.cfg->size > r.cfg->size; });
>
> - /* Apply the format on the sensor with any cached transform. */
> + /*
> + * Apply the format on the sensor with any cached transform.
> + *
> + * If the application has provided a sensor configuration apply it
> + * instead of just applying a format.
> + */
> const RPiCameraConfiguration *rpiConfig =
> static_cast<const RPiCameraConfiguration *>(config);
> - V4L2SubdeviceFormat sensorFormat = rpiConfig->sensorFormat_;
> + V4L2SubdeviceFormat sensorFormat;
>
> - ret = data->sensor_->setFormat(&sensorFormat, rpiConfig->combinedTransform_);
> + if (rpiConfig->sensorConfig) {
> + ret = data->sensor_->applyConfiguration(rpiConfig->sensorConfig,
> + rpiConfig->combinedTransform_,
> + &sensorFormat);
> + } else {
> + sensorFormat = rpiConfig->sensorFormat_;
> + ret = data->sensor_->setFormat(&sensorFormat,
> + rpiConfig->combinedTransform_);
> + }
> if (ret)
> return ret;
>
> diff --git a/src/libcamera/pipeline/rpi/common/pipeline_base.h b/src/libcamera/pipeline/rpi/common/pipeline_base.h
> index a139c98a5a2b..0a795f4d2689 100644
> --- a/src/libcamera/pipeline/rpi/common/pipeline_base.h
> +++ b/src/libcamera/pipeline/rpi/common/pipeline_base.h
> @@ -42,6 +42,7 @@ namespace RPi {
> /* Map of mbus codes to supported sizes reported by the sensor. */
> using SensorFormats = std::map<unsigned int, std::vector<Size>>;
>
> +class RPiCameraConfiguration;
> class CameraData : public Camera::Private
> {
> public:
> @@ -72,7 +73,8 @@ public:
> V4L2VideoDevice *dev;
> };
>
> - virtual CameraConfiguration::Status platformValidate(std::vector<StreamParams> &rawStreams,
> + virtual CameraConfiguration::Status platformValidate(RPiCameraConfiguration *rpiConfig,
Can the RPiCameraConfiguration *rpiConfig be made const in the declaration?
Other than that:
Reviewed-by: Naushir Patuck <naush at raspberrypi.com>
> + std::vector<StreamParams> &rawStreams,
> std::vector<StreamParams> &outStreams) const = 0;
> virtual int platformConfigure(const V4L2SubdeviceFormat &sensorFormat,
> std::optional<BayerFormat::Packing> packing,
> diff --git a/src/libcamera/pipeline/rpi/vc4/vc4.cpp b/src/libcamera/pipeline/rpi/vc4/vc4.cpp
> index 018cf4881d0e..bf864d4174b2 100644
> --- a/src/libcamera/pipeline/rpi/vc4/vc4.cpp
> +++ b/src/libcamera/pipeline/rpi/vc4/vc4.cpp
> @@ -65,7 +65,8 @@ public:
> {
> }
>
> - CameraConfiguration::Status platformValidate(std::vector<StreamParams> &rawStreams,
> + CameraConfiguration::Status platformValidate(RPi::RPiCameraConfiguration *rpiConfig,
> + std::vector<StreamParams> &rawStreams,
> std::vector<StreamParams> &outStreams) const override;
>
> int platformPipelineConfigure(const std::unique_ptr<YamlObject> &root) override;
> @@ -394,7 +395,8 @@ int PipelineHandlerVc4::platformRegister(std::unique_ptr<RPi::CameraData> &camer
> return 0;
> }
>
> -CameraConfiguration::Status Vc4CameraData::platformValidate(std::vector<StreamParams> &rawStreams,
> +CameraConfiguration::Status Vc4CameraData::platformValidate(RPi::RPiCameraConfiguration *rpiConfig,
> + std::vector<StreamParams> &rawStreams,
> std::vector<StreamParams> &outStreams) const
> {
> CameraConfiguration::Status status = CameraConfiguration::Status::Valid;
> @@ -405,9 +407,29 @@ CameraConfiguration::Status Vc4CameraData::platformValidate(std::vector<StreamPa
> return CameraConfiguration::Status::Invalid;
> }
>
> - if (!rawStreams.empty())
> + if (!rawStreams.empty()) {
> rawStreams[0].dev = unicam_[Unicam::Image].dev();
>
> + /* Adjust the RAW stream to match the requested sensor config. */
> + if (rpiConfig->sensorConfig) {
> + StreamConfiguration *rawStream = rawStreams[0].cfg;
> + BayerFormat rawBayer = BayerFormat::fromMbusCode(rpiConfig->sensorFormat_.mbus_code);
> +
> + /* Handle flips to make sure to match the RAW stream format. */
> + if (flipsAlterBayerOrder_)
> + rawBayer = rawBayer.transform(rpiConfig->combinedTransform_);
> + PixelFormat rawFormat = rawBayer.toPixelFormat();
> +
> + if (rawStream->pixelFormat != rawFormat ||
> + rawStream->size != rpiConfig->sensorConfig.outputSize) {
> + rawStream->pixelFormat = rawFormat;
> + rawStream->size = rpiConfig->sensorConfig.outputSize;
> +
> + status = CameraConfiguration::Adjusted;
> + }
> + }
> + }
> +
> /*
> * For the two ISP outputs, one stream must be equal or smaller than the
> * other in all dimensions.
> @@ -417,6 +439,8 @@ CameraConfiguration::Status Vc4CameraData::platformValidate(std::vector<StreamPa
> for (unsigned int i = 0; i < outStreams.size(); i++) {
> Size size;
>
> + /* \todo Warn if upscaling: reduces image quality. */
> +
> size.width = std::min(outStreams[i].cfg->size.width,
> outStreams[0].cfg->size.width);
> size.height = std::min(outStreams[i].cfg->size.height,
> --
> 2.40.1
>
More information about the libcamera-devel
mailing list