[PATCH 2/3] gstreamer: Generate controls from control_ids_*.yaml files
Jaslo Ziska
jaslo at ziska.de
Thu Aug 8 14:25:40 CEST 2024
Hi Nicolas,
thanks for the review.
Nicolas Dufresne <nicolas at ndufresne.ca> writes:
> Hi,
>
> I started inspecting the generated documentation. It is
> generally hard to get a
> perfectly clean results, but let me comment few things. We can
> at least try some
> improvement.
>
>> Factory Details:
>> Rank primary (256)
>> Long-name libcamera Source
>> Klass Source/Video
>> Description Linux Camera source using libcamera
>> Author Nicolas Dufresne
>> <nicolas.dufresne at collabora.com>
>
> Thanks for this one!
>>
>> Plugin Details:
>> Name libcamera
>> Description libcamera capture plugin
>> Filename
>> /home/nicolas/Sources/libcamera/build/src/gstreamer/libgstlibcamera.so
>> Version 0.3.1+20-80a202bf
>> License LGPL
>> Source module libcamera
>> Binary package libcamera
>> Origin URL https://libcamera.org
>>
>> GObject
>> +----GInitiallyUnowned
>> +----GstObject
>> +----GstElement
>> +----GstLibcameraSrc
>>
>> Implemented Interfaces:
>> GstChildProxy
>>
>> Pad Templates:
>> SRC template: 'src'
>> Availability: Always
>> Capabilities:
>> video/x-raw
>> image/jpeg
>> video/x-bayer
>> Type: GstLibcameraPad
>> Pad Properties:
>>
>> stream-role : The selected stream role
>> flags: readable, writable,
>> changeable only in NULL or READY
>> state
>> Enum "GstLibcameraStreamRole"
>> Default: 2, "video-recording"
>> (1): still-capture -
>> libcamera::StillCapture
>> (2): video-recording -
>> libcamera::VideoRecording
>> (3): view-finder -
>> libcamera::Viewfinder
>>
>>
>> SRC template: 'src_%u'
>> Availability: On request
>> Capabilities:
>> video/x-raw
>> image/jpeg
>> video/x-bayer
>> Type: GstLibcameraPad
>> Pad Properties:
>>
>> stream-role : The selected stream role
>> flags: readable, writable,
>> changeable only in NULL or READY
>> state
>> Enum "GstLibcameraStreamRole"
>> Default: 2, "video-recording"
>> (1): still-capture -
>> libcamera::StillCapture
>> (2): video-recording -
>> libcamera::VideoRecording
>> (3): view-finder -
>> libcamera::Viewfinder
>>
>>
>> Element has no clocking capabilities.
>> Element has no URI handling capabilities.
>>
>> Pads:
>> SRC: 'src'
>> Pad Template: 'src'
>>
>> Element Properties:
>>
>> ae-constraint-mode : Specify a constraint mode for the AE
>> algorithm to use. These determine how the measured scene
>> brightness is adjusted to reach the desired target exposure.
>> Constraint modes may be platform specific, and not all
>> constraint modes may be supported.
>
> Inspect generally allow for pretty short description, but I do
> like having the full description, specially that as long as this
> element lives here, we are unlikely to pull in the GStreamer doc
> generator for it. Might be worth giving a try to line breaks,
> though.
I wasn't sure if the whole description should be included but I
also like having the whole description there as one can then use
the gstreamer element without consulting the libcamera
documentation.
I looked at a few gstreamer elements (h264parse and webrtcbin)
with long descriptions (it was surprisingly hard to find some) and
they both did not include line breaks in the description. Should I
really try to add some?
>> flags: readable, writable, controllable
>> Enum "AeConstraintMode" Default: 0,
>> "normal"
>> (0): normal - Default constraint mode. This mode aims to
>> balance the exposure of different parts of the image so as to
>> reach a reasonable average level. However, highlights in the
>> image may appear over-exposed and lowlights may appear
>> under-exposed.
>> (1): highlight - Highlight
>> constraint mode. This mode adjusts
>> the exposure levels in order to try
>> and avoid over-exposing the
>> brightest parts (highlights) of an
>> image. Other non-highlight parts of
>> the image may appear under-exposed.
>> (2): shadows - Shadows
>> constraint mode. This mode adjusts
>> the exposure levels in order to try
>> and avoid under-exposing the dark
>> parts (shadows) of an image. Other
>> normally exposed parts of the image
>> may appear over-exposed.
>> (3): custom - Custom
>> constraint mode.
>
> Same here, would be nice to at least "try" something, but this
> is part of things that may of may not be easy. Everything else
> seems good.
>
>>
>> ae-enable : Enable or disable the AE. See also:
>> exposure-time, analogue-gain.
>> flags: readable, writable, controllable
>> Boolean. Default: false
>>
>> ae-exposure-mode : Specify an exposure mode for the AE
>> algorithm to use. These specify how the desired total exposure
>> is divided between the shutter time and the sensor's analogue
>> gain. The exposure modes are platform specific, and not
>> all exposure modes may be supported.
>> flags: readable, writable, controllable
>> Enum "AeExposureMode" Default: 0,
>> "normal"
>> (0): normal - Default
>> exposure mode.
>> (1): short - Exposure
>> mode allowing only short exposure
>> times.
>> (2): long - Exposure
>> mode allowing long exposure times.
>> (3): custom - Custom
>> exposure mode.
>>
>> ae-flicker-detected : Flicker period detected in microseconds.
>> The value reported here indicates the currently
>> detected flicker period, or zero if no flicker at all is
>> detected. When AeFlickerMode is set to FlickerAuto, there may
>> be a period during which the value reported here remains zero.
>> Once a non-zero value is reported, then this is the
>> flicker period that has been detected and is now being
>> cancelled. In the case of 50Hz mains flicker, the value would
>> be
>> 10000 (corresponding to 100Hz), or 8333 (120Hz) for 60Hz mains
>> flicker. It is implementation dependent whether the
>> system can continue to detect flicker of different periods when
>> another frequency is already being cancelled. See also:
>> ae-flicker-mode.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> ae-flicker-mode : Set the flicker mode, which determines
>> whether, and how, the AGC/AEC algorithm attempts to hide
>> flicker effects caused by the duty cycle of artificial
>> lighting. Although implementation dependent, many algorithms
>> for
>> "flicker avoidance" work by restricting this exposure time to
>> integer multiples of the cycle period, wherever possible.
>> Implementations may not support all of the flicker modes listed
>> below. By default the system will start in FlickerAuto
>> mode if this is supported, otherwise the flicker mode will be
>> set to FlickerOff.
>> flags: readable, writable, controllable
>> Enum "AeFlickerMode" Default: 0, "off"
>
> Is that accurate or accidental default ?
All the control defaults are set to zero as a default in the spec
at the moment. That's why the first enum variant is the default
for all enums. So this is kind of accidental.
The thing is that (at the moment, that can of course be changed)
none of these default controls even get applied to requests. Only
once you do g_object_set_property() will the control be added to
the ControlList.
If we would want to have custom defaults for controls then these
would need to be specified somewhere either in the
control_ids_*.yaml or somewhere else.
>> (0): off - No flicker
>> avoidance is performed.
>> (1): manual - Manual
>> flicker avoidance. Suppress flicker
>> effects caused by lighting running
>> with a period specified by the
>> AeFlickerPeriod control. See also:
>> ae-flicker-period.
>> (2): auto - Automatic flicker period detection and avoidance.
>> The system will automatically determine the most likely
>> value of flicker period, and avoid flicker of this frequency.
>> Once flicker is being corrected, it is implementation
>> dependent whether the system is still able to detect a change
>> in the flicker period. See also: ae-flicker-detected.
>>
>> ae-flicker-period : Manual flicker period in microseconds. This
>> value sets the current flicker period to avoid. It is
>> used when AeFlickerMode is set to FlickerManual. To cancel 50Hz
>> mains flicker, this should be set to 10000
>> (corresponding to 100Hz), or 8333 (120Hz) for 60Hz mains.
>> Setting the mode to FlickerManual when no AeFlickerPeriod has
>> ever been set means that no flicker cancellation occurs (until
>> the value of this control is updated). Switching to modes
>> other than FlickerManual has no effect on the value of the
>> AeFlickerPeriod control. See also: ae-flicker-mode.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> ae-locked : Report the lock status of a running AE algorithm.
>> If the AE algorithm is locked the value shall be set to
>> true, if it's converging it shall be set to false. If the AE
>> algorithm is not running the control shall not be present
>> in the metadata control list. See also: ae-enable.
>> flags: readable, writable, controllable
>> Boolean. Default: false
>
> As this one is a status, it should only be readable, without the
> writable/controllable. If I'm not mistaken, you get this value
> withing the finalized request, would be nice enhancement to
> notify our users of the change using g_notify() and/or bus
> messages.
The readable/writeable situation can hopefully be solved by adding
some parsable information to the yaml.
A notification about a change would be nice. Maybe these type of
controls can also be marked in the yaml somehow.
>> ae-metering-mode : Specify a metering mode for the AE
>> algorithm to use. The metering modes determine which parts of
>> the image are used to determine the scene brightness.
>> Metering modes may be platform specific and not all metering
>> modes may be supported.
>> flags: readable, writable, controllable
>> Enum "AeMeteringMode" Default: 0,
>> "centre-weighted"
>> (0): centre-weighted -
>> Centre-weighted metering mode.
>> (1): spot - Spot
>> metering mode.
>> (2): matrix - Matrix
>> metering mode.
>> (3): custom - Custom
>> metering mode.
>
> From the doc, this seems pretty obscure. Shouldn't "custom"
> comes with another control ? Perhaps we introduce a mask to hide
> the controls that are not yet usable or that the usage isn't
> obvious and may need special case or rework ?
Hmmm yeah I don't understand this either, maybe custom is hardware
specific? Stuff like this could be hidden of course.
>> af-metering : Instruct the AF algorithm how it should
>> decide which parts of the image should be used to measure
>> focus.
>> flags: readable, writable, controllable
>> Enum "AfMetering" Default: 0, "auto"
>> (0): auto - The AF
>> algorithm should decide for itself
>> where it will measure focus.
>> (1): windows - The AF
>> algorithm should use the rectangles
>> defined by the AfWindows control to
>> measure focus. If no windows are
>> specified the behaviour is platform
>> dependent.
>>
>> af-mode : Control to set the mode of the AF
>> (autofocus) algorithm. An implementation may choose not to
>> implement all the modes.
>> flags: readable, writable, controllable
>> Enum "AfMode" Default: 0, "manual"
>
> Is that appropriate default ? Of course does not matter if there
> is no focus on the target. I wonder how you get to know if focus
> is there or not ...
>
>> (0): manual - The AF algorithm is in manual mode. In this mode
>> it will never perform any action nor move the lens of
>> its own accord, but an application can specify the desired lens
>> position using the LensPosition control. In this mode
>> the AfState will always report AfStateIdle. If the camera is
>> started in AfModeManual, it will move the focus lens to the
>> position specified by the LensPosition control. This mode is
>> the recommended default value for the AfMode control.
>> External cameras (as reported by the Location property set to
>> CameraLocationExternal) may use a different default value.
>> (1): auto - The AF algorithm is in auto mode. This means that
>> the algorithm will never move the lens or change state
>> unless the AfTrigger control is used. The AfTrigger control can
>> be used to initiate a focus scan, the results of which
>> will be reported by AfState. If the autofocus algorithm is
>> moved from AfModeAuto to another mode while a scan is in
>> progress, the scan is cancelled immediately, without waiting
>> for the scan to finish. When first entering this mode the
>> AfState will report AfStateIdle. When a trigger control is
>> sent, AfState will report AfStateScanning for a period before
>> spontaneously changing to AfStateFocused or AfStateFailed,
>> depending on the outcome of the scan. It will remain in this
>> state until another scan is initiated by the AfTrigger control.
>> If a scan is cancelled (without changing to another
>> mode), AfState will return to AfStateIdle.
>> (2): continuous - The AF algorithm is in continuous mode. This
>> means that the lens can re-start a scan spontaneously
>> at any moment, without any user intervention. The AfState still
>> reports whether the algorithm is currently scanning or
>> not, though the application has no ability to initiate or
>> cancel scans, nor to move the lens for itself. However,
>> applications can pause the AF algorithm from continuously
>> scanning by using the AfPause control. This allows video or
>> still images to be captured whilst guaranteeing that the focus
>> is fixed. When set to AfModeContinuous, the system will
>> immediately initiate a scan so AfState will report
>> AfStateScanning, and will settle on one of AfStateFocused or
>> AfStateFailed, depending on the scan result.
>>
>> af-pause : This control has no effect except when
>> in continuous autofocus mode (AfModeContinuous). It can be
>> used to pause any lens movements while (for example) images
>> are captured. The algorithm remains inactive until it is
>> instructed to resume.
>> flags: readable, writable, controllable
>> Enum "AfPause" Default: 0, "immediate"
>> (0): immediate - Pause the continuous autofocus algorithm
>> immediately, whether or not any kind of scan is underway.
>> AfPauseState will subsequently report AfPauseStatePaused.
>> AfState may report any of AfStateScanning, AfStateFocused or
>> AfStateFailed, depending on the algorithm's state when it
>> received this control.
>> (1): deferred - This is similar to AfPauseImmediate, and if the
>> AfState is currently reporting AfStateFocused or
>> AfStateFailed it will remain in that state and AfPauseState
>> will report AfPauseStatePaused. However, if the algorithm is
>> scanning (AfStateScanning), AfPauseState will report
>> AfPauseStatePausing until the scan is finished, at which point
>> AfState will report one of AfStateFocused or AfStateFailed, and
>> AfPauseState will change to AfPauseStatePaused.
>> (2): resume - Resume
>> continuous autofocus operation. The
>> algorithm starts again from exactly
>> where it left off, and AfPauseState
>> will report AfPauseStateRunning.
>>
>> af-pause-state : Only applicable in continuous
>> (AfModeContinuous) mode, this reports whether the algorithm is
>> currently running, paused or pausing (that is, will pause as
>> soon as any in-progress scan completes). Any change to
>> AfMode will cause AfPauseStateRunning to be reported.
>> flags: readable, writable, controllable
>
> Does not seem writable.
>
>> Enum "AfPauseState" Default: 0,
>> "running"
>> (0): running - Continuous
>> AF is running and the algorithm may
>> restart a scan spontaneously.
>> (1): pausing - Continuous AF has been sent an AfPauseDeferred
>> control, and will pause as soon as any in-progress scan
>> completes (and then report AfPauseStatePaused). No new scans
>> will be start spontaneously until the AfPauseResume control
>> is sent.
>> (2): paused - Continuous
>> AF is paused. No further state
>> changes or lens movements will occur
>> until the AfPauseResume control is
>> sent.
>>
>> af-range : Control to set the range of focus
>> distances that is scanned. An implementation may choose not
>> to implement all the options here.
>> flags: readable, writable, controllable
>> Enum "AfRange" Default: 0, "normal"
>> (0): normal - A wide range
>> of focus distances is scanned, all
>> the way from infinity down to close
>> distances, though depending on the
>> implementation, possibly not
>> including the very closest macro
>> positions.
>> (1): macro - Only close
>> distances are scanned.
>> (2): full - The full
>> range of focus distances is scanned
>> just as with AfRangeNormal but this
>> time including the very closest
>> macro positions.
>>
>> af-speed : Control that determines whether the AF algorithm is
>> to move the lens as quickly as possible or more
>> steadily. For example, during video recording it may be
>> desirable not to move the lens too abruptly, but when in a
>> preview mode (waiting for a still capture) it may be helpful to
>> move the lens as quickly as is reasonably possible.
>> flags: readable, writable, controllable
>> Enum "AfSpeed" Default: 0, "normal"
>> (0): normal - Move the
>> lens at its usual speed.
>> (1): fast - Move the
>> lens more quickly.
>>
>> af-state : Reports the current state of the AF algorithm in
>> conjunction with the reported AfMode value and (in
>> continuous AF mode) the AfPauseState value. The possible state
>> changes are described below, though we note the following
>> state transitions that occur when the AfMode is changed. If the
>> AfMode is set to AfModeManual, then the AfState will
>> always report AfStateIdle (even if the lens is subsequently
>> moved). Changing to the AfModeManual state does not initiate
>> any lens movement. If the AfMode is set to AfModeAuto then the
>> AfState will report AfStateIdle. However, if AfModeAuto
>> and AfTriggerStart are sent together then AfState will omit
>> AfStateIdle and move straight to AfStateScanning (and start
>> a scan). If the AfMode is set to AfModeContinuous then the
>> AfState will initially report AfStateScanning.
>> flags: readable, writable, controllable
>
> Seems read-only.
>
>> Enum "AfState" Default: 0, "idle"
>> (0): idle - The AF
>> algorithm is in manual mode
>> (AfModeManual) or in auto mode
>> (AfModeAuto) and a scan has not yet
>> been triggered, or an in-progress
>> scan was cancelled.
>> (1): scanning - The AF algorithm is in auto mode (AfModeAuto),
>> and a scan has been started using the AfTrigger
>> control. The scan can be cancelled by sending AfTriggerCancel
>> at which point the algorithm will either move back to
>> AfStateIdle or, if the scan actually completes before the
>> cancel request is processed, to one of AfStateFocused or
>> AfStateFailed. Alternatively the AF algorithm could be in
>> continuous mode (AfModeContinuous) at which point it may enter
>> this state spontaneously whenever it determines that a rescan
>> is needed.
>> (2): focused - The AF
>> algorithm is in auto (AfModeAuto) or
>> continuous (AfModeContinuous) mode
>> and a scan has completed with the
>> result that the algorithm believes
>> the image is now in focus.
>> (3): failed - The AF
>> algorithm is in auto (AfModeAuto) or
>> continuous (AfModeContinuous) mode
>> and a scan has completed with the
>> result that the algorithm did not
>> find a good focus position.
>>
>> af-trigger : This control starts an autofocus scan
>> when AfMode is set to AfModeAuto, and can also be used to
>> terminate a scan early. It is ignored if AfMode is set to
>> AfModeManual or AfModeContinuous.
>> flags: readable, writable, controllable
>> Enum "AfTrigger" Default: 0, "start"
>> (0): start - Start an AF
>> scan. Ignored if a scan is in
>> progress.
>> (1): cancel - Cancel an AF
>> scan. This does not cause the lens
>> to move anywhere else. Ignored if no
>> scan is in progress.
>
> This one is missing something to make sense, at least from
> GStreamer point of view. When you are not starting or
> cancelling, what value this control should change to ? That
> question might be relevant for libcamera globally.
>
> Without this third state, I would say this one should not be
> there, and replace with action signals.
True, that would make more sense. Maybe controls like these can
also be marked in the yaml somehow?
>> analogue-gain : Analogue gain value applied in the sensor
>> device. The value of the control specifies the gain
>> multiplier applied to all colour channels. This value cannot be
>> lower than 1.0. Setting this value means that it is now
>> fixed and the AE algorithm may not change it. Setting it back
>> to zero returns it to the control of the AE algorithm. See
>> also: exposure-time, ae-enable. Todo: Document the interactions
>> between AeEnable and setting a fixed value for this
>> control. Consider interactions with other AE features, such as
>> aperture and aperture/shutter priority mode, and decide
>> if control of which features should be automatically adjusted
>> shouldn't better be handled through a separate AE mode
>> control.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>
> I'm not confident there is no range, would be nice if we can
> align to something sensible (might need yaml changes of course).
>
>>
>> awb-enable : Enable or disable the AWB. See also:
>> colour-gains.
>> flags: readable, writable, controllable
>> Boolean. Default: false
>
> Should be on by default (if not, we should do that in gst ;-P).
>
>>
>> awb-locked : Report the lock status of a running AWB algorithm.
>> If the AWB algorithm is locked the value shall be set
>> to true, if it's converging it shall be set to false. If the
>> AWB algorithm is not running the control shall not be
>> present in the metadata control list. See also: awb-enable.
>> flags: readable, writable, controllable
>> Boolean. Default: false
>
> Read-only.
>
>>
>> awb-mode : Specify the range of illuminants to use
>> for the AWB algorithm. The modes supported are platform
>> specific, and not all modes may be supported.
>> flags: readable, writable, controllable
>> Enum "AwbMode" Default: 0, "auto"
>> (0): auto - Search over
>> the whole colour temperature range.
>> (1): incandescent - Incandescent
>> AWB lamp mode.
>> (2): tungsten - Tungsten AWB
>> lamp mode.
>> (3): fluorescent - Fluorescent
>> AWB lamp mode.
>> (4): indoor - Indoor AWB
>> lighting mode.
>> (5): daylight - Daylight AWB
>> lighting mode.
>> (6): cloudy - Cloudy AWB
>> lighting mode.
>> (7): custom - Custom AWB
>> mode.
>
> Again, unclear how custom can be used.
>
>>
>> brightness : Specify a fixed brightness parameter.
>> Positive values (up to 1.0) produce brighter images; negative
>> values (up to -1.0) produce darker images and 0.0 leaves
>> pixels unchanged.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>
> So this time the range is documented, we need a machine readable
> form.
>
>>
>> camera-name : Select by name which camera to use.
>> flags: readable, writable, changeable
>> only in NULL or READY state
>> String. Default: null
>>
>> colour-correction-matrix: The 3x3 matrix that converts camera
>> RGB to sRGB within the imaging pipeline. This should
>> describe the matrix that is used after pixels have been
>> white-balanced, but before any gamma transformation. The 3x3
>> matrix is stored in conventional reading order in an array of 9
>> floating point values.
>> flags: readable, writable, controllable
>> Default: "< >"
>> GstValueArray of GValues of type
>> "gfloat"
>
> The type only allow flat list, but as its a matrix I was
> expecting
>
> "< < 1, 2, 3 >,
> < 4, 5, 6 >,
> < 7, 8, 9 > >"
>
> That being said I would be fine with flat raster data:
>
> "< 1, 2, 3,
> 4, 5, 6,
> 7, 8, 9 >"
>
> The down side is for bindings. Consider Python, the first would
> create a collection that you can access with matrix[Y][X] and
> more importantly can store into numpy.matrix.
>
> A comment for all list "< >" syntax. The usage and serialization
> syntax is not easy to guess. For matrix, if we had the identity
> matrix as default instead of an empty list, that would help.
> Otherwise we need a way to extend the doc for GStreamer usage.
I thought it would be best to use a flat array here because the
documentation mentions that it is an array of 9 values.
An identity matrix as default would work but I think this is the
same discussion as the default values for the enums: that the
default might be hardware specific. That's why I was kind of happy
that you could leave arrays empty as a default.
>> colour-gains : Pair of gain values for the Red and
>> Blue colour channels, in that order. ColourGains can only be
>> applied in a Request when the AWB is disabled. See also:
>> awb-enable.
>> flags: readable, writable, controllable
>> Default: "< >"
>> GstValueArray of GValues of type
>> "gfloat"
>
> Again the type allow for flat list, but I think we have "< < r1,
> r2 >, < b1, b2 > >" ?
I think "< r b >" would actually be correct here.
>> colour-temperature : Report the current estimate of the
>> colour temperature, in kelvin, for this frame. The
>> ColourTemperature control can only be returned in metadata.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>
> read-only.
>
>>
>> contrast : Specify a fixed contrast parameter.
>> Normal contrast is given by the value 1.0; larger values
>> produce images with more contrast.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>
> Range needed programmatically.
>
>>
>> digital-gain : Digital gain value applied during the processing
>> steps applied to the image as captured from the
>> sensor. The global digital gain factor is applied to all the
>> colour channels of the RAW image. Different pipeline models
>> are free to specify how the global gain factor applies to each
>> separate channel. If an imaging pipeline applies digital
>> gain in distinct processing steps, this value indicates their
>> total sum. Pipelines are free to decide how to adjust each
>> processing step to respect the received gain factor and shall
>> report their total value in the request metadata.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> draft-ae-precapture-trigger: Control for AE metering trigger.
>> Currently identical to ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER.
>> Whether the camera device will trigger a precapture metering
>> sequence when it processes this request.
>> flags: readable, writable, controllable
>> Enum "AePrecaptureTrigger" Default: 0,
>> "idle"
>> (0): idle - The trigger
>> is idle.
>> (1): start - The
>> pre-capture AE metering is started
>> by the camera.
>> (2): cancel - The camera
>> will cancel any active or completed
>> metering sequence. The AE algorithm
>> is reset to its initial state.
>
> Perhaps we can skip over draft- as this could later break our
> interface. We can also add an env to include them ?
Sure, I could hide that behind an env variable. What about other
vendor controls, should they be included?
>> draft-ae-state : Control to report the current AE
>> algorithm state. Currently identical to
>> ANDROID_CONTROL_AE_STATE. Current state of the AE algorithm.
>> flags: readable, writable, controllable
>> Enum "AeState" Default: 0, "inactive"
>> (0): inactive - The AE
>> algorithm is inactive.
>> (1): searching - The AE
>> algorithm has not converged yet.
>> (2): converged - The AE
>> algorithm has converged.
>> (3): locked - The AE
>> algorithm is locked.
>> (4): flash-required - The AE
>> algorithm would need a flash for
>> good results
>> (5): precapture - The AE
>> algorithm has started a pre-capture
>> metering session. See also:
>> ae-precapture-trigger.
>>
>> draft-awb-state : Control to report the current AWB
>> algorithm state. Currently identical to
>> ANDROID_CONTROL_AWB_STATE. Current state of the AWB
>> algorithm.
>> flags: readable, writable, controllable
>> Enum "AwbState" Default: 0,
>> "state-inactive"
>> (0): state-inactive - The AWB
>> algorithm is inactive.
>> (1): state-searching - The AWB
>> algorithm has not converged yet.
>> (2): converged - The AWB
>> algorithm has converged.
>> (3): locked - The AWB
>> algorithm is locked.
>>
>> draft-color-correction-aberration-mode: Control to select the
>> color correction aberration mode. Currently identical to
>> ANDROID_COLOR_CORRECTION_ABERRATION_MODE. Mode of operation
>> for the chromatic aberration correction algorithm.
>> flags: readable, writable, controllable
>> Enum "ColorCorrectionAberrationMode"
>> Default: 0, "off"
>> (0): off - No
>> aberration correction is applied.
>> (1): fast - Aberration
>> correction will not slow down the
>> frame rate.
>> (2): high-quality - High quality
>> aberration correction which might
>> reduce the frame rate.
>>
>> draft-lens-shading-map-mode: Control to report if the lens
>> shading map is available. Currently identical to
>> ANDROID_STATISTICS_LENS_SHADING_MAP_MODE.
>> flags: readable, writable, controllable
>> Enum "LensShadingMapMode" Default: 0,
>> "ff"
>> (0): ff - No lens
>> shading map mode is available.
>> (1): n - The lens
>> shading map mode is available.
>>
>> draft-max-latency : The maximum number of frames that can occur
>> after a request (different than the previous) has been
>> submitted, and before the result's state becomes synchronized.
>> A value of -1 indicates unknown latency, and 0 indicates
>> per-frame control. Currently identical to
>> ANDROID_SYNC_MAX_LATENCY.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> draft-noise-reduction-mode: Control to select the noise
>> reduction algorithm mode. Currently identical to
>> ANDROID_NOISE_REDUCTION_MODE. Mode of operation for the
>> noise reduction algorithm.
>> flags: readable, writable, controllable
>> Enum "NoiseReductionMode" Default: 0,
>> "off"
>> (0): off - No noise
>> reduction is applied
>> (1): fast - Noise
>> reduction is applied without
>> reducing the frame rate.
>> (2): high-quality - High quality
>> noise reduction at the expense of
>> frame rate.
>> (3): minimal - Minimal
>> noise reduction is applied without
>> reducing the frame rate.
>> (4): z-s-l - Noise
>> reduction is applied at different
>> levels to different streams.
>>
>> draft-pipeline-depth: Specifies the number of pipeline stages
>> the frame went through from when it was exposed to when
>> the final completed result was available to the framework.
>> Always less than or equal to PipelineMaxDepth. Currently
>> identical to ANDROID_REQUEST_PIPELINE_DEPTH. The typical value
>> for this control is 3 as a frame is first exposed,
>> captured and then processed in a single pass through the ISP.
>> Any additional processing step performed after the ISP
>> pass (in example face detection, additional format conversions
>> etc) count as an additional pipeline stage.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> draft-sensor-rolling-shutter-skew: Control to report the time
>> between the start of exposure of the first row and the start
>> of exposure of the last row. Currently identical to
>> ANDROID_SENSOR_ROLLING_SHUTTER_SKEW
>> flags: readable, writable, controllable
>> Integer64. Range: -9223372036854775808
>> - 9223372036854775807 Default: 0
>>
>> draft-test-pattern-mode: Control to select the test pattern
>> mode. Currently identical to
>> ANDROID_SENSOR_TEST_PATTERN_MODE.
>> flags: readable, writable, controllable
>> Enum "TestPatternMode" Default: 0,
>> "off"
>> (0): off - No test
>> pattern mode is used. The camera
>> device returns frames from the image
>> sensor.
>> (1): solid-color - Each pixel
>> in [R, G_even, G_odd, B] is replaced
>> by its respective color channel
>> provided in test pattern data. Todo:
>> Add control for test pattern data.
>> (2): color-bars - All pixel data is replaced with an 8-bar
>> color pattern. The vertical bars (left-to-right) are as
>> follows; white, yellow, cyan, green, magenta, red, blue and
>> black. Each bar should take up 1/8 of the sensor pixel array
>> width. When this is not possible, the bar size should be
>> rounded down to the nearest integer and the pattern can repeat
>> on the right side. Each bar's height must always take up the
>> full sensor pixel array height.
>> (3): color-bars-fade-to-gray - The test pattern is similar to
>> TestPatternModeColorBars, except that each bar should
>> start at its specified color at the top and fade to gray at the
>> bottom. Furthermore each bar is further subdevided into
>> a left and right half. The left half should have a smooth
>> gradient, and the right half should have a quantized gradient.
>> In particular, the right half's should consist of blocks of the
>> same color for 1/16th active sensor pixel array width.
>> The least significant bits in the quantized gradient should be
>> copied from the most significant bits of the smooth
>> gradient. The height of each bar should always be a multiple of
>> 128. When this is not the case, the pattern should
>> repeat at the bottom of the image.
>> (4): pn9 - All pixel data is replaced by a pseudo-random
>> sequence generated from a PN9 512-bit sequence (typically
>> implemented in hardware with a linear feedback shift register).
>> The generator should be reset at the beginning of each
>> frame, and thus each subsequent raw frame with this test
>> pattern should be exactly the same as the last.
>> (256): custom1 - The first custom test pattern. All custom
>> patterns that are available only on this camera device are
>> at least this numeric value. All of the custom test patterns
>> will be static (that is the raw image must not vary from
>> frame to frame).
>>
>> exposure-time : Exposure time (shutter speed) for the frame
>> applied in the sensor device. This value is specified in
>> micro-seconds. Setting this value means that it is now fixed
>> and the AE algorithm may not change it. Setting it back to
>> zero returns it to the control of the AE algorithm. See also:
>> analogue-gain, ae-enable. Todo: Document the interactions
>> between AeEnable and setting a fixed value for this control.
>> Consider interactions with other AE features, such as
>> aperture and aperture/shutter priority mode, and decide if
>> control of which features should be automatically adjusted
>> shouldn't better be handled through a separate AE mode control.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> exposure-value : Specify an Exposure Value (EV) parameter. The
>> EV parameter will only be applied if the AE algorithm
>> is currently enabled. By convention EV adjusts the exposure as
>> log2. For example EV = [-2, -1, 0.5, 0, 0.5, 1, 2]
>> results in an exposure adjustment of [1/4x, 1/2x, 1/sqrt(2)x,
>> 1x, sqrt(2)x, 2x, 4x]. See also: ae-enable.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> focus-fo-m : Reports a Figure of Merit (FoM) to indicate how
>> in-focus the frame is. A larger FocusFoM value indicates
>> a more in-focus frame. This singular value may be based on a
>> combination of statistics gathered from multiple focus
>> regions within an image. The number of focus regions and method
>> of combination is platform dependent. In this respect,
>> it is not necessarily aimed at providing a way to implement a
>> focus algorithm by the application, rather an indication
>> of how in-focus a frame is.
>> flags: readable, writable, controllable
>> Integer. Range: -2147483648 -
>> 2147483647 Default: 0
>>
>> frame-duration : The instantaneous frame duration from
>> start of frame exposure to start of next exposure, expressed
>> in microseconds. This control is meant to be returned in
>> metadata.
>> flags: readable, writable, controllable
>> Integer64. Range: -9223372036854775808
>> - 9223372036854775807 Default: 0
>>
>> frame-duration-limits: The minimum and maximum (in that order)
>> frame duration, expressed in microseconds. When
>> provided by applications, the control specifies the sensor
>> frame duration interval the pipeline has to use. This limits
>> the largest exposure time the sensor can use. For example, if a
>> maximum frame duration of 33ms is requested
>> (corresponding to 30 frames per second), the sensor will not be
>> able to raise the exposure time above 33ms. A fixed
>> frame duration is achieved by setting the minimum and maximum
>> values to be the same. Setting both values to 0 reverts to
>> using the camera defaults. The maximum frame duration provides
>> the absolute limit to the shutter speed computed by the
>> AE algorithm and it overrides any exposure mode setting
>> specified with controls::AeExposureMode. Similarly, when a
>> manual exposure time is set through controls::ExposureTime, it
>> also gets clipped to the limits set by this control. When
>> reported in metadata, the control expresses the minimum and
>> maximum frame durations used after being clipped to the
>> sensor provided frame duration limits. See also:
>> ae-exposure-mode. See also: exposure-time. Todo: Define how to
>> calculate the capture frame rate by defining controls to report
>> additional delays introduced by the capture pipeline or
>> post-processing stages (ie JPEG conversion, frame scaling).
>> Todo: Provide an explicit definition of default control
>> values, for this and all other controls.
>> flags: readable, writable, controllable
>> Default: "< >"
>> GstValueArray of GValues of type
>> "gint64"
>>
>> gamma : Specify a fixed gamma value. Default
>> must be 2.2 which closely mimics sRGB gamma. Note that this
>> is camera gamma, so it is applied as 1.0/gamma.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> hdr-channel : This value is reported back to the application so
>> that it can discover whether this capture corresponds
>> to the short or long exposure image (or any other image used by
>> the HDR procedure). An application can monitor the HDR
>> channel to discover when the differently exposed images have
>> arrived. This metadata is only available when an HDR mode
>> has been enabled. See also: hdr-mode.
>> flags: readable, writable, controllable
>> Enum "HdrChannel" Default: 0, "none"
>> (0): none - This image
>> does not correspond to any of the
>> captures used to create an HDR
>> image.
>> (1): short - This is a
>> short exposure image.
>> (2): medium - This is a
>> medium exposure image.
>> (3): long - This is a
>> long exposure image.
>>
>> hdr-mode : Control to set the mode to be used for High Dynamic
>> Range (HDR) imaging. HDR techniques typically include
>> multiple exposure, image fusion and tone mapping techniques to
>> improve the dynamic range of the resulting images. When
>> using an HDR mode, images are captured with different sets of
>> AGC settings called HDR channels. Channels indicate in
>> particular the type of exposure (short, medium or long) used to
>> capture the raw image, before fusion. Each HDR image is
>> tagged with the corresponding channel using the HdrChannel
>> control. See also: hdr-channel.
>> flags: readable, writable, controllable
>> Enum "HdrMode" Default: 0, "off"
>> (0): off - HDR is
>> disabled. Metadata for this frame
>> will not include the HdrChannel
>> control.
>> (1): multi-exposure-unmerged - Multiple exposures will be
>> generated in an alternating fashion. However, they will not
>> be merged together and will be returned to the application as
>> they are. Each image will be tagged with the correct HDR
>> channel, indicating what kind of exposure it is. The tag should
>> be the same as in the HdrModeMultiExposure case. The
>> expectation is that an application using this mode would merge
>> the frames to create HDR images for itself if it requires
>> them.
>> (2): multi-exposure - Multiple exposures will be generated and
>> merged to create HDR images. Each image will be tagged
>> with the HDR channel (long, medium or short) that arrived and
>> which caused this image to be output. Systems that use two
>> channels for HDR will return images tagged alternately as the
>> short and long channel. Systems that use three channels
>> for HDR will cycle through the short, medium and long channel
>> before repeating.
>> (3): single-exposure - Multiple
>> frames all at a single exposure will
>> be used to create HDR images. These
>> images should be reported as all
>> corresponding to the HDR short
>> channel.
>> (4): night - Multiple
>> frames will be combined to produce
>> "night mode" images. It is up to the
>> implementation exactly which HDR
>> channels it uses, and the images
>> will all be tagged accordingly with
>> the correct HDR channel information.
>>
>> lens-position : Acts as a control to instruct the lens to move
>> to a particular position and also reports back the
>> position of the lens for each frame. The LensPosition control
>> is ignored unless the AfMode is set to AfModeManual,
>> though the value is reported back unconditionally in all modes.
>> This value, which is generally a non-integer, is the
>> reciprocal of the focal distance in metres, also known as
>> dioptres. That is, to set a focal distance D, the lens
>> position LP is given by \f$LP = \frac{1\mathrm{m}}{D}\f$ For
>> example: 0 moves the lens to infinity. 0.5 moves the lens
>> to focus on objects 2m away. 2 moves the lens to focus on
>> objects 50cm away. And larger values will focus the lens
>> closer. The default value of the control should indicate a good
>> general position for the lens, often corresponding to
>> the hyperfocal distance (the closest position for which objects
>> at infinity are still acceptably sharp). The minimum
>> will often be zero (meaning infinity), and the maximum value
>> defines the closest focus position. Todo: Define a property
>> to report the Hyperfocal distance of calibrated lenses.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> lux : Report an estimate of the current
>> illuminance level in lux. The Lux control can only be
>> returned in metadata.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> name : The name of the object
>> flags: readable, writable
>> String. Default: "libcamerasrc0"
>>
>> parent : The parent of the object
>> flags: readable, writable
>> Object of type "GstObject"
>>
>> saturation : Specify a fixed saturation parameter.
>> Normal saturation is given by the value 1.0; larger values
>> produce more saturated colours; 0.0 produces a greyscale
>> image.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> sensor-black-levels : Reports the sensor black levels used for
>> processing a frame, in the order R, Gr, Gb, B. These
>> values are returned as numbers out of a 16-bit pixel range (as
>> if pixels ranged from 0 to 65535). The SensorBlackLevels
>> control can only be returned in metadata.
>> flags: readable, writable, controllable
>> Default: "< >"
>> GstValueArray of GValues of type "gint"
>>
>> sensor-temperature : Temperature measure from the camera sensor
>> in Celsius. This is typically obtained by a thermal
>> sensor present on-die or in the camera module. The range of
>> reported temperatures is device dependent. The
>> SensorTemperature control will only be returned in metadata if
>> a thermal sensor is present.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>>
>> sensor-timestamp : The time when the first row of the image
>> sensor active array is exposed. The timestamp, expressed
>> in nanoseconds, represents a monotonically increasing counter
>> since the system boot time, as defined by the
>> Linux-specific CLOCK_BOOTTIME clock id. The SensorTimestamp
>> control can only be returned in metadata. Todo: Define how
>> the sensor timestamp has to be used in the reprocessing use
>> case.
>> flags: readable, writable, controllable
>> Integer64. Range: -9223372036854775808
>> - 9223372036854775807 Default: 0
>>
>> sharpness : A value of 0.0 means no sharpening. The minimum
>> value means minimal sharpening, and shall be 0.0 unless
>> the camera can't disable sharpening completely. The default
>> value shall give a "reasonable" level of sharpening,
>> suitable for most use cases. The maximum value may apply
>> extremely high levels of sharpening, higher than anyone could
>> reasonably want. Negative values are not allowed. Note also
>> that sharpening is not applied to raw streams.
>> flags: readable, writable, controllable
>> Float. Range: -3.402823e+38 -
>> 3.402823e+38 Default: 0
>
>
> I think my comments begins to be repetitive, and if we solve the
> earlier issues
> we will solve them all. The main thing is that the yaml should
> explicitly define
> more stuff rather then relying to text. And using that, we can
> easily adjust
> GStreamer properties. A final note, not all of these will be
> supported. I was
> wondering if we should add an extra property that tells use
> which one are
> actually supported ? We don't need anything fency, a "/"
> seperate list in a
> string or similar could do. We can also go for GstStructure.
>
> Nicolas
Best regards,
Jaslo
More information about the libcamera-devel
mailing list