[PATCH v3 12/16] libcamera: pipeline: simple: enable use of Soft ISP and Soft IPA
Milan Zamazal
mzamazal at redhat.com
Thu Feb 15 17:47:54 CET 2024
Hans de Goede <hdegoede at redhat.com> writes:
> From: Andrey Konovalov <andrey.konovalov at linaro.org>
>
> To enable the Simple Soft ISP and Soft IPA for simple pipeline handler
> configure the build with:
> -Dpipelines=simple -Dipas=simple
>
> Also using the Soft ISP for the particular hardware platform must
> be enabled in the supportedDevices[] table.
It would be nice if it was possible to use/test software ISP without specific
patches to the array. Do I get it right that the idea is to enable softisp for
certain devices where it can be used & there is no better pipeline handler to
use? And there could be a runtime option for devices where it can be used &
there is a better pipeline handler to use? Not a blocker but it should be
clarified in the commit message.
> If the pipeline uses Converter, Soft ISP and Soft IPA aren't
> available.
>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org> # sc8280xp Lenovo x13s
> Tested-by: Pavel Machek <pavel at ucw.cz>
> Reviewed-by: Pavel Machek <pavel at ucw.cz>
> Signed-off-by: Andrey Konovalov <andrey.konovalov at linaro.org>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> src/libcamera/pipeline/simple/simple.cpp | 136 ++++++++++++++++++-----
> 1 file changed, 108 insertions(+), 28 deletions(-)
>
> diff --git a/src/libcamera/pipeline/simple/simple.cpp b/src/libcamera/pipeline/simple/simple.cpp
> index 78854ef8..eab5b56e 100644
> --- a/src/libcamera/pipeline/simple/simple.cpp
> +++ b/src/libcamera/pipeline/simple/simple.cpp
> @@ -34,6 +34,7 @@
> #include "libcamera/internal/device_enumerator.h"
> #include "libcamera/internal/media_device.h"
> #include "libcamera/internal/pipeline_handler.h"
> +#include "libcamera/internal/software_isp/software_isp.h"
> #include "libcamera/internal/v4l2_subdevice.h"
> #include "libcamera/internal/v4l2_videodevice.h"
>
> @@ -185,17 +186,22 @@ struct SimplePipelineInfo {
> * and the number of streams it supports.
> */
> std::vector<std::pair<const char *, unsigned int>> converters;
> + /*
> + * Using Software ISP is to be enabled per driver.
> + * The Software ISP can't be used together with the converters.
> + */
> + bool swIspEnabled;
> };
>
> namespace {
>
> static const SimplePipelineInfo supportedDevices[] = {
> - { "dcmipp", {} },
> - { "imx7-csi", { { "pxp", 1 } } },
> - { "j721e-csi2rx", {} },
> - { "mxc-isi", {} },
> - { "qcom-camss", {} },
> - { "sun6i-csi", {} },
> + { "dcmipp", {}, false },
> + { "imx7-csi", { { "pxp", 1 } }, false },
> + { "j721e-csi2rx", {}, false },
> + { "mxc-isi", {}, false },
> + { "qcom-camss", {}, true },
> + { "sun6i-csi", {}, false },
> };
>
> } /* namespace */
> @@ -274,6 +280,7 @@ public:
> bool useConversion_;
>
> std::unique_ptr<Converter> converter_;
> + std::unique_ptr<SoftwareIsp> swIsp_;
>
> private:
> void tryPipeline(unsigned int code, const Size &size);
> @@ -281,6 +288,9 @@ private:
>
> void conversionInputDone(FrameBuffer *buffer);
> void conversionOutputDone(FrameBuffer *buffer);
> +
> + void ispStatsReady(int dummy);
> + void setSensorControls(const ControlList &sensorControls);
> };
>
> class SimpleCameraConfiguration : public CameraConfiguration
> @@ -332,6 +342,7 @@ public:
> V4L2VideoDevice *video(const MediaEntity *entity);
> V4L2Subdevice *subdev(const MediaEntity *entity);
> MediaDevice *converter() { return converter_; }
> + bool swIspEnabled() { return swIspEnabled_; }
>
> protected:
> int queueRequestDevice(Camera *camera, Request *request) override;
> @@ -360,6 +371,7 @@ private:
> std::map<const MediaEntity *, EntityData> entities_;
>
> MediaDevice *converter_;
> + bool swIspEnabled_;
> };
>
> /* -----------------------------------------------------------------------------
> @@ -509,6 +521,29 @@ int SimpleCameraData::init()
> }
> }
>
> + /*
> + * Instantiate Soft ISP if this is enabled for the given driver and no converter is used.
> + */
> + if (!converter_ && pipe->swIspEnabled()) {
> + swIsp_ = std::make_unique<SoftwareIsp>(pipe, sensor_->controls());
> + if (!swIsp_->isValid()) {
> + LOG(SimplePipeline, Warning)
> + << "Failed to create software ISP, disabling software debayering";
> + swIsp_.reset();
> + } else {
> + /*
> + * \todo explain why SimpleCameraData::conversionInputDone() can't be directly
> + * connected to inputBufferReady signal.
> + */
> + swIsp_->inputBufferReady.connect(pipe, [this](FrameBuffer *buffer) {
> + this->conversionInputDone(buffer);
> + });
> + swIsp_->outputBufferReady.connect(this, &SimpleCameraData::conversionOutputDone);
> + swIsp_->ispStatsReady.connect(this, &SimpleCameraData::ispStatsReady);
> + swIsp_->setSensorControls.connect(this, &SimpleCameraData::setSensorControls);
> + }
> + }
> +
> video_ = pipe->video(entities_.back().entity);
> ASSERT(video_);
>
> @@ -599,12 +634,20 @@ void SimpleCameraData::tryPipeline(unsigned int code, const Size &size)
> config.captureFormat = pixelFormat;
> config.captureSize = format.size;
>
> - if (!converter_) {
> - config.outputFormats = { pixelFormat };
> - config.outputSizes = config.captureSize;
> - } else {
> + if (converter_) {
> config.outputFormats = converter_->formats(pixelFormat);
> config.outputSizes = converter_->sizes(format.size);
> + } else if (swIsp_) {
> + config.outputFormats = swIsp_->formats(pixelFormat);
> + config.outputSizes = swIsp_->sizes(pixelFormat, format.size);
> + if (config.outputFormats.empty()) {
> + /* Do not use swIsp for unsupported pixelFormat's: */
> + config.outputFormats = { pixelFormat };
> + config.outputSizes = config.captureSize;
> + }
> + } else {
> + config.outputFormats = { pixelFormat };
> + config.outputSizes = config.captureSize;
> }
>
> configs_.push_back(config);
> @@ -750,9 +793,9 @@ void SimpleCameraData::bufferReady(FrameBuffer *buffer)
> }
>
> /*
> - * The converter is in use. Requeue the internal buffer for
> - * capture (unless the stream is being stopped), and complete
> - * the request with all the user-facing buffers.
> + * The converter or Software ISP is in use. Requeue the internal
> + * buffer for capture (unless the stream is being stopped), and
> + * complete the request with all the user-facing buffers.
> */
> if (buffer->metadata().status != FrameMetadata::FrameCancelled)
> video_->queueBuffer(buffer);
> @@ -798,9 +841,9 @@ void SimpleCameraData::bufferReady(FrameBuffer *buffer)
> buffer->metadata().timestamp);
>
> /*
> - * Queue the captured and the request buffer to the converter if format
> - * conversion is needed. If there's no queued request, just requeue the
> - * captured buffer for capture.
> + * Queue the captured and the request buffer to the converter or Software
> + * ISP if format conversion is needed. If there's no queued request, just
> + * requeue the captured buffer for capture.
> */
> if (useConversion_) {
> if (conversionQueue_.empty()) {
> @@ -808,7 +851,11 @@ void SimpleCameraData::bufferReady(FrameBuffer *buffer)
> return;
> }
>
> - converter_->queueBuffers(buffer, conversionQueue_.front());
> + if (converter_)
> + converter_->queueBuffers(buffer, conversionQueue_.front());
> + else
> + swIsp_->queueBuffers(buffer, conversionQueue_.front());
> +
> conversionQueue_.pop();
> return;
> }
> @@ -834,6 +881,18 @@ void SimpleCameraData::conversionOutputDone(FrameBuffer *buffer)
> pipe->completeRequest(request);
> }
>
> +void SimpleCameraData::ispStatsReady([[maybe_unused]] int dummy)
> +{
> + swIsp_->processStats(sensor_->getControls({ V4L2_CID_ANALOGUE_GAIN,
> + V4L2_CID_EXPOSURE }));
> +}
> +
> +void SimpleCameraData::setSensorControls(const ControlList &sensorControls)
> +{
> + ControlList ctrls(sensorControls);
> + sensor_->setControls(&ctrls);
> +}
> +
> /* Retrieve all source pads connected to a sink pad through active routes. */
> std::vector<const MediaPad *> SimpleCameraData::routedSourcePads(MediaPad *sink)
> {
> @@ -1046,8 +1105,10 @@ CameraConfiguration::Status SimpleCameraConfiguration::validate()
> /* Set the stride, frameSize and bufferCount. */
> if (needConversion_) {
> std::tie(cfg.stride, cfg.frameSize) =
> - data_->converter_->strideAndFrameSize(cfg.pixelFormat,
> - cfg.size);
> + (data_->converter_) ? data_->converter_->strideAndFrameSize(cfg.pixelFormat,
> + cfg.size)
> + : data_->swIsp_->strideAndFrameSize(cfg.pixelFormat,
> + cfg.size);
> if (cfg.stride == 0)
> return Invalid;
> } else {
> @@ -1210,7 +1271,9 @@ int SimplePipelineHandler::configure(Camera *camera, CameraConfiguration *c)
> inputCfg.stride = captureFormat.planes[0].bpl;
> inputCfg.bufferCount = kNumInternalBuffers;
>
> - return data->converter_->configure(inputCfg, outputCfgs);
> + return (data->converter_) ? data->converter_->configure(inputCfg, outputCfgs)
> + : data->swIsp_->configure(inputCfg, outputCfgs,
> + data->sensor_->controls());
> }
>
> int SimplePipelineHandler::exportFrameBuffers(Camera *camera, Stream *stream,
> @@ -1224,8 +1287,10 @@ int SimplePipelineHandler::exportFrameBuffers(Camera *camera, Stream *stream,
> * whether the converter is used or not.
> */
> if (data->useConversion_)
> - return data->converter_->exportBuffers(data->streamIndex(stream),
> - count, buffers);
> + return (data->converter_) ? data->converter_->exportBuffers(data->streamIndex(stream),
> + count, buffers)
> + : data->swIsp_->exportBuffers(data->streamIndex(stream),
> + count, buffers);
> else
> return data->video_->exportBuffers(count, buffers);
> }
> @@ -1270,10 +1335,18 @@ int SimplePipelineHandler::start(Camera *camera, [[maybe_unused]] const ControlL
> }
>
> if (data->useConversion_) {
> - ret = data->converter_->start();
> - if (ret < 0) {
> - stop(camera);
> - return ret;
> + if (data->converter_) {
> + ret = data->converter_->start();
> + if (ret < 0) {
> + stop(camera);
> + return ret;
> + }
> + } else if (data->swIsp_) {
> + ret = data->swIsp_->start();
> + if (ret < 0) {
> + stop(camera);
> + return ret;
> + }
> }
>
> /* Queue all internal buffers for capture. */
> @@ -1289,8 +1362,13 @@ void SimplePipelineHandler::stopDevice(Camera *camera)
> SimpleCameraData *data = cameraData(camera);
> V4L2VideoDevice *video = data->video_;
>
> - if (data->useConversion_)
> - data->converter_->stop();
> + if (data->useConversion_) {
> + if (data->converter_)
> + data->converter_->stop();
> + else if (data->swIsp_) {
> + data->swIsp_->stop();
> + }
> + }
>
> video->streamOff();
> video->releaseBuffers();
> @@ -1452,6 +1530,8 @@ bool SimplePipelineHandler::match(DeviceEnumerator *enumerator)
> }
> }
>
> + swIspEnabled_ = info->swIspEnabled;
> +
> /* Locate the sensors. */
> std::vector<MediaEntity *> sensors = locateSensors();
> if (sensors.empty()) {
More information about the libcamera-devel
mailing list